Setup Flowchart; Setup Checklist - HP rp4410 Service Manual

Table 3-13 Setup Checklist
Step
Standard Setup
1 Preparation
2 Configure the iLO MP LAN
3 Log on to the iLO MP
4 Change default user name and
password
5 Set up user accounts
6 Set up security access
Advanced Setup
1 Activate Advanced Pack Features

Setup Flowchart

To assist in the Integrity iLO MP setup process, use this flowchart as a guide.
Action
1. Determine a LAN configuration method and assign an IP
address if necessary.
2. Determine an access method to select and connect the cables.
Choose one of the following methods to configure the LAN for
iLO MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port
Log in to the iLO MP from a supported web browser or command
line using the default user name and password.
Change the default user name and password on the administrator
account to your predefined selections.
Set up the user accounts if you are using the local accounts
feature.
Set up the security access settings.
Activate advanced features by entering a license key.
X
Console Setup 105