Cancel User-Defined Kanji Characters - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
FS ?
[Name]

Cancel user-defined Kanji characters

[Format] ASCII
Hex
Decimal
[Printers not featuring this command] TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60, TM-U230,
[Range] The ranges of
c1
and
Models
Japanese model (JIS code)
Japanese model (SHIFT JIS code)
Simplified Chinese
Traditional Chinese
Korean
[Description] Deletes the user-defined Kanji character pattern specified by the character codes (
selected Kanji font.
•
•
[Notes]
This command is effective only for Japanese, Simplified Chinese, Traditional Chinese, or Korean models.
After user-defined Kanji characters are canceled, a space is printed.
The foreign character pattern of the selected Kanji character font is deleted. Use function 48 of FS ( A to
specify the Kanji character font.
Paper roll Kanji commands
Kanji commands
c1 c2
FS ?
c1 c2
1C 3F
c1 c2
28 63
c1 c2
and differ, depending on specifications and the character code system used. The ranges of
c2
for each model are as follows.
c1 specifies the first byte of a character code for a user-defined Kanji character.
c2 specifies the second byte of a character code for a user-defined Kanji character.
FS ?
c1 c2
21H ≤
c1
= 77H
40H ≤
c1 = ECH c2
80H ≤
c2
A1H ≤
c1 = FEH
A1H ≤
c1
= FEH
A1H ≤
c1
= FEH
≤ 7EH
c2
≤ 7EH,
≤ 9EH
≤ FEH
c2
≤ FEH
c2
≤ FEH
c2
c1 and
S
ETTING COMMAND
TM-U300A/B
c2 ) of the currently
Ver. 10.01 p. 508