Esc Sp - Epson TM-T88III Programming Manual

C O N F I D E N T I A L

ESC SP

[Name] Set right-side character spacing
[Format] ASCII
Hex
Decimal
[Range] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90,
TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U300A/B: 0 ≤
n
[Default] = 0
[Printers not featuring this command] None
[Description] Sets the right-side character spacing to
[Notes]
The character spacing set by this command is effective for alphanumeric, Kana, Thai, and user-defined
characters.
When characters are enlarged, the character spacing is
double-width mode is twice the normal value.
When standard mode is selected, the horizontal motion unit is used.
When page mode is selected, the vertical or horizontal motion unit is used for the print direction set by
ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
The character spacing can be set independently in standard mode and in page mode.
• In standard mode this command sets the character spacing of standard mode.
• In page mode this command sets the character spacing of page mode.
If the horizontal or vertical motion unit is changed after this command is executed, the character spacing is
not changed.
Paper roll Character commands
Character commands
n
ESC SP
n
1B 20
n
27 32
≤ 32
n
horizontal motion unit is used.
vertical motion unit is used.
ESC SP
TM-U210: 0 ≤ ≤ 255
n
× (horizontal or vertical motion unit).
n
n
times normal value. The character spacing for
S
ETTING COMMAND
Ver. 10.01 p. 103