Gs $ - Epson TM-T88III Programming Manual

C O N F I D E N T I A L

GS $

[Name] Set absolute vertical print position in page mode
[Format] ASCII
Hex
Decimal
0 ≤
[Range] n
L
[Default] None
[Printers not featuring this command] TM-U230, TM-U220, TM-U210,
[Description] In page mode, moves the vertical print position to (
the starting position set by ESC T.
In page mode, moves the vertical print position to [(nL + nH x 256) x (vertical or horizontal motion unit)] from
the starting position set with ESC T.
[Notes]
This command is enabled only in page mode. If this command is processed in standard mode, it is ignored.
The printer ignores any setting that exceeds the print area set by ESC W.
The horizontal or vertical motion unit is used for the print direction set by ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
Even if the vertical or horizontal motion unit is changed after changing the print position, the print
position will not be changed.
[Model-dependent variations]
See program example and print sample for GS $ and GS
TM-J2000/J2100
The vertical or horizontal motion unit is specified by GS P.
Paper roll Print position commands
Print position commands
n n
GS $
L H
n n
1D 24
L H
n n
29 36
L H
≤ 255, 0 ≤ ≤ 255
n
H
vertical motion unit is used.
horizontal motion unit is used.
TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II,
TM-U300A/B
n n
+
L H
\.
GS $
× 256) × (vertical or horizontal motion unit) from
TM-P60
E
XECUTING COMMAND
Ver. 10.01 p. 183