Partial Cut (Three Points Left Uncut) - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
ESC m
[Name]

Partial cut (three points left uncut)

[Format] ASCII
Hex
Decimal
[Range] None
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II,
[Description] Executes a partial cut of the roll paper.
[Recommended Functions]
This command is supported by some printer models but will not be supported by future printer models.
GS V is recommended for cutting paper. GS V <Function A> gives the same result as this command.
[Notes]
See
The cutting shape depends on the specification of the mounted autocutter.
[Model-dependent variations]
Paper roll Mechanism control commands
Mechanism control commands
ESC m
1B 6D
27 109
TM-U210
GS V <Function A> for details.
TM-U220
ESC m
obsolete command
obsolete command
E
XECUTING COMMAND
TM-P60, TM-U230,
Ver. 10.01 p. 370