Set Buzzer (Beep/Call Tone); Display Brightness Setting (Led/7-Segment Display); Initialize Settings - Panasonic AKHRP200 Operating Instructions Manual

Setup.Mode.Operations.
7-2.Set.pedestal
Press.<UP>.or.<DOWN>.to.select.[PE].and.press.
<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
• To exit setup mode, hold down <EXIT> for about 2 seconds.
• To make other settings, press <SELECT> to select a menu number.
8..Set.buzzer.(beep/call.tone)
1..
Press.<SELECT>to.select.menu.number.[8].
Select on/off
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN SAVE/LOAD EXIT
Press to exit setup mode
(hold down)
2..
Press.<UP>.or.<DOWN>.to.select.[on].and.press.
<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
• To exit setup mode, hold down <EXIT> for about 2 seconds.
• To make other settings, press <SELECT> to select a menu number.
9.Display.brightness.setting.(LED/7-segment.display)
Press.<SELECT>to.select.menu.number.[9].
LED display brightness
Adjust brightness
7-segment display brightness
UP
ND
M.GAIN
DATA
SET
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD
UP+DOWN
LED/7-segment display switch
Press to exit setup mode
(hold down)
(continued)
CC SHT SYNC
M.PED
IRIS
CAMERA
SHT SYNC
M.PED 10-19
No.
SELECT
EXECUTE
Press to confirm
Press to select the
menu number
CC SHT SYNC
M.PED
IRIS
CAMERA
CC SHT SYNC
M.PED 10-19
No.
IRIS
SELECT
EXIT EXECUTE
Press to confirm
Press to select the
menu number
9-1.Set.LED.brightness
1.. Press.<SAVE/LOAD>.to.select.[ND].and.press.
<EXECUTE>.to.confirm.the.selection.
• Each press of <SAVE/LOAD> toggles between [ND] (LED display
brightness) and [CC] (7-segment display brightness).
ND
M.GAIN
2.. Press.<UP>.or.<DOWN>.to.select.LED.display.brightness.
and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
• To exit setup mode, hold down <EXIT> for about 2 seconds.
• To make other settings, press <SELECT> to select a menu number.
9-2.Set.7-segment.display.brightness
1..
Press.<SAVE/LOAD>.to.select.[CC].and.press.
<EXECUTE>.to.confirm.the.selection.
• Each press of <SAVE/LOAD> toggles between [ND] (LED display
brightness) and [CC] (7-segment display brightness).
ND
M.GAIN
2..
Press.<UP>.or.<DOWN>.to.select.7-segment.display.
brightness.and.press.<EXECUTE>.to.confirm.the.
selection.
ND
M.GAIN
• To exit setup mode, hold down <EXIT> for about 2 seconds.
• To make other settings, press <SELECT> to select a menu number.
Menu.numbers.10.to.15.are.for.future.use.
16.Initialize.settings
<Note>
When settings are initialized, the unit is automatically restarted.For
details on what settings are initialized, refer to page 6
1..
Press.<SELECT>to.select.menu.number.[16].
Select y (Initialize)/n (Cancel)
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN SAVE/LOAD EXIT
Press to exit setup mode
(hold down)
CC SHT SYNC
M.PED
IRIS
CC SHT SYNC
M.PED
IRIS
CC SHT SYNC
M.PED
IRIS
CC SHT SYNC
M.PED
IRIS
SHT SYNC CAMERA
M.PED 10-19
No.
SELECT
EXECUTE
Press to confirm
Press to select the
menu number
11