Microprocessor; Coin Drop - Maytag MDE/MDG21PDA Service Manual

Disassembly Procedures
!
4. Lift Control Panel away from the dryer .

Microprocessor

1. Disconnect power supply to unit.
2. Remove four security screws securing the Facia.
Microprocessor
©2004 Maytag Appliances Company
WARNING
Screws
Control
Panel
16022904 Rev. 0
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
3. Remove three screws securing the Microprocessor to
the Control Panel.
4. Observe the position of the harness connector plugged
into the Microprocessor Board.

Coin Drop

Coin Drop
1. Disconnect power to the machine.
2. Remove the Service Panel.
3. Remove three security torx screws and two pozi-drive
screws securing the Control Panel.
Remove
Screws
Harness Connector
51