Syslog Profile
Syslog Profile
The Syslog profile is used to create a standard template for the Syslog objects listed below. These objects
are discussed in detail in the
•
•
•
Syslog profiles are created using the Syslog Management Profile window.
To launch the Syslog Management window, perform one of the following:
•
•
•
The following figure is an example of the Syslog Management Profile window.
Figure 12-3 Syslog Management Profile Window
Using this window you can perform the following tasks:
•
•
Cisco Catalyst Switch Manager User Guide
12-6
Syslog Management
Max. Syslog Severity
Max. Table Entries
Enable Notification
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > Logical > Software > Syslog Profile.
Right–click a Network Element object within the Network or Physical containment views, then
choose Logical > Software > Syslog Profile.
Right–click a Software object within the Physical containment view, then choose Syslog Profile.
Creating a Syslog Profile
Applying a Syslog Profile
Chapter 12
Window, found in
Chapter 9, "Software Management."
Profile Management
OL-4930-01