Configuration Tab; General; Add/Remove Tunnel Interfaces - Cisco WS-C3550-12G User Manual

GRE Interface Management Window

Configuration Tab

The following areas are available on the Configuration tab of the GRE Interface Management window:
•
•

General

This area provides the following information:
•
•
•
•
•
•

Add/Remove Tunnel Interfaces

This area provides the following information:
•
•
•
Cisco Catalyst Switch Manager User Guide
10-38
General
Add/Remove Tunnel Interfaces
Source—Indicates the GRE interface tunnel source IP address.
Mode—Indicates the GRE interface tunnel mode. Valid values are as follows:
– Aurp—AppleTalk Update–based Routing Protocol (AURP)
Cayman—Cayman TunnelTalk AppleTalk encapsulation
–
Eon—Eon Compatible LLNS Tunnel
–
Iptalk—AppleTalk IP encapsulation
–
Mpls—MPLS encapsulation
–
– Nos—IP–over–IP encapsulation (KAqQ/NOS compatible)
– Dvmrp—Distance Vector Multicast Routing Protocol (DVMRP) multicast tunnel
– Gre—Generic Routing Encapsulation (GRE) protocol
– Ipip—IP–over–IP encapsulation
– None
Gre—Indicates whether tunneling is IP, Multicast, or None.
Decapsulate—Determines whether decapsulation is configured for the tunnel. A value of 'None'
indicates that decapsulation is not configured.
Destination—Indicates the GRE interface tunnel destination IP address, if configured.
Key—Unique identifier assigned to the tunnel.
Tunnel Id—Indicates the tunnel interface to be added to or removed from the interface
configuration.
Add—Creates the specified tunnel interface on the device with the input tunnel interface number
and automatically deploys a GRE interface object in the EM.
Remove—Deletes the specified GRE interface on the device and the interface object from the EM.
Chapter 10 Virtual Interface Management
OL-4930-01