Details Tab; Configuration - Cisco WS-C3550-12G User Manual

Chapter 11 Routing Management
All information in this window is retrieved or set using IOS commands. If the IOS Telnet or the Enable
Note
password specified in the Network Element Management window is incorrect, attributes in this window
might be displayed as ERROR.
The following tabs are available on the EIGRP Management window:
•
•
•
•

Details Tab

The following areas are available on the Details tab of the EIGRP Management window:
•
•

Configuration

The Configuration area provides the following information:
•
•
•
•
•
•
•
OL-4930-01
Details Tab
Redistribution Tab
Distribution List Tab
Additional Notes Tab
Configuration
Local Networks
Autonomous System—Autonomous system number for this EIGRP process.
Router Summarization—If true, subnet routes are summarized automatically into network-level
routes. Automatic summarization is performed when there are two or more networks associated with
the EIGRP process.
Stuck In Active—Length of time (in minutes) that a route stays active. This value determines the
maximum period of time that an EIGRP router will wait for replies to its queries. If this value is set too
low, there might not be enough time for all the neighboring routers to send their replies to the active
router.
Log Neighbor Changes—If true, changes to neighbor adjacencies are logged. This can be useful to
monitor the stability of the routing system and help detect problems.
Log Neighbor Warnings—If true, neighbor warning messages are logged.
Delete EIGRP—Deletes the currently selected EIGRP process from the switch or router.
Add EIGRP—Adds EIGRP processes to the switch or router. Launches the EIGRP
Management—Add window.
EIGRP Management Window
Cisco Catalyst Switch Manager User Guide
11-15