Appendix C
Command Summary
keepalive maxfailure
Syntax Description
Usage Guidelines
Related Commands
key
Syntax Description
Usage Guidelines
78-13124-05
Specifies the number of failed keepalive responses before the virtual server is set
to "suspended".
keepalive maxfailure <count>
count
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Server Configuration Command Set)
keepalive frequency (Server Configuration Command Set)
Sets the specified key for use by the server.
key <keyname | default | default-1024 | default 512>
keyname
default
default-1024
default-512
Availability: Serial, Telnet; FIPS Mode (serial only)
Only one key is allowed per server. If you enter this command with a different key,
that reference replaces the earlier one.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The number of failed keepalive message responses;
the range is 1 to 10 (inclusive); the default is 3
The name of the key.
The pre-loaded default key.
The pre-loaded 1024-bit default key.
The pre-loaded 512-bit default key.
Configuration Command Set
C-155