NETGEAR WNDR3700 - RangeMax Dual Band Wireless-N Gigabit Router Wireless Setup Manual page 30

Check your wireless security. If you used WPS to enable wireless security, your security will
6.
be set to WPA/WPA2 with a randomly-selected PSK security password.
7. Click Apply to save any changes.
If you are configuring the router from a wireless computer and you change the
router's SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings of
your computer to match the router's new settings.
Configure and test your computers for wireless connectivity.
8.
Program the wireless adapter of your computers to have the same wireless network name
(SSID) as the wireless-N gigabit router and the same wireless security as your wireless-N
gigabit router. Check that they have a wireless link and are able to obtain an IP address by
DHCP from the router.
Your wireless-N gigabit router is now configured to provide Internet access for your network.
Your wireless-N gigabit router automatically connects to the Internet when one of your computers
requires access. It is not necessary to run a dialer or login application such as Dial-Up Networking
or Enternet to connect, log in, or disconnect. These functions are performed automatically by the
wireless-N gigabit router as needed.
To access the Internet from any computer connected to your wireless-N gigabit router, launch a
browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless-N
gigabit router's Internet LED blink, indicating communication to the ISP. The browser should
begin to display a Web page.
26 Configuring Your Wireless Network for Internet Access