NETGEAR WNDR3700 - RangeMax Dual Band Wireless-N Gigabit Router Wireless Setup Manual page 26

Set up the 2.4 GHz wireless network:
4.
a. Enter the SSID name. The default is NETGEAR.
The SSID of any wireless adapters must match the SSID you configure in the
wireless-N gigabit router. If they do not match, you will not get a wireless
connection.
b. Select the operating channel for the wireless mode. The default is Auto. When Auto is
selected, the router finds the best operating channel available.
If you notice interference from nearby devices, you can select a different channel.
Channels 1, 6, and 11 will not interfere with each other.
c. Leave the wireless mode set to the default setting of Up to 145Mbps for 2.4GHz.
Select security options for the 2.4GHz wireless network.
5.
The wireless Security Options are set to None by default. NETGEAR strongly recommends
that you use wireless security. You can select a different Security Option and a different
passphrase for each wireless network. For the highest performance of the 2.4GHz wireless
network and the most secure encryption, NETGEAR recommends that you use WPA2-PSK as
your security option.
6. Set up the 5GHz wireless network:
a. Enter the SSID name. The default is NETGEAR-5G.
The SSID of any wireless adapters must match the SSID you configure in the
wireless-N gigabit router. If they do not match, you will not get a wireless
connection.
Select the operating channel for the wireless mode. The default channel is 36. If there is an
b.
Auto option in the channel list and you select it, the router will find the best operating
channel available.
If you notice interference from nearby devices, you can select a different channel.
Channels 1, 6, and 11 will not interfere with each other.
Leave the wireless mode set to the default setting of Up to 300Mbps for 5GHz.
c.
7. Select security options for the 5 GHz wireless network.
22 Configuring Your Wireless Network for Internet Access