1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Access Point
  5. WN802T
  6. User manual

NETGEAR WN802T - RangeMax Next Wireless Access Point User Manual

Wireless-n access point
Hide thumbs Also See for WN802T - RangeMax Next Wireless Access Point:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Installation Manual
RangeMax NEXT
Wireless-N Access Point
WN802T Reference
Manual
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10204-03
v1.0
August 2007

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR WN802T - RangeMax Next Wireless Access Point

Summary of Contents for NETGEAR WN802T - RangeMax Next Wireless Access Point

  • Page 1 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10204-03 v1.0 August 2007...

  • Page 2: Regulatory Compliance Information

    In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
  • Page 3 [Swedish] väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Íslenska Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við grunnkröfur og aðrar [Icelandic] kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de grunnleggende [Norwegian] krav og øvrige relevante krav i direktiv 1999/5/EF.
  • Page 4 RangeMax NEXT Wireless-N Access Point Tested to Comply with FCC Standards FOR HOME OR OFFICE USE PY306200049 Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate the equipment. v1.0, August 2007...
  • Page 5 Certificate of the Manufacturer/Importer It is hereby certified that the RangeMax NEXT Wireless-N Access Point has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions.
  • Page 6 v1.0, August 2007...

  • Page 7: Table Of Contents

    Contents About This Manual Conventions, Formats and Scope ..................ix How to Use This Manual ....................x How to Print this Manual ....................x Revision History ........................ xi Chapter 1 Introduction About the RangeMax NEXT Wireless-N Access Point ...........1-1 Key Features ........................1-1 System Requirements ....................1-2 What’s in the Box ......................1-3 Front Panel of the RangeMax NEXT ................1-3...
  • Page 8 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Chapter 3 Wireless Security Settings Understanding WN802T Wireless Security Options ............3-1 WEP/WPA Settings ....................3-2 SSID and WEP/WPA Settings Setup Form ..............3-4 Configuring WEP ......................3-5 Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2-PSK .........3-7 Configuring WPA with Radius, WPA2 with Radius, and WPA + WPA2 with Radius ..3-8 Restricting Wireless Access by MAC Address .............3-10 Chapter 4...

  • Page 9: About This Manual

    About This Manual The NETGEAR ® RangeMax™ NEXT Wireless-N Access Point WN802T Reference Manual describes how to install, configure and troubleshoot the RangeMax NEXT Wireless-N Access Point. The information in this manual is intended for readers with intermediate computer and Internet skills.

  • Page 10: How To Use This Manual

    • button to access the full NETGEAR, Inc. online KnowledgeBase for the product model. • Links to PDF versions of the full manual and individual chapters.

  • Page 11: Revision History

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Printing a Chapter. Use the PDF of This Chapter link at the top left of any page. – Click the PDF of This Chapter link at the top right of any page in the chapter you want to print.
  • Page 12 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual About This Manual v1.0, August 2007...

  • Page 13: Introduction

    Chapter 1 Introduction This chapter describes some of the key features of the NETGEAR RangeMax NEXT Wireless-N Access Point. It also includes the minimum prerequisites for installation (“System Requirements” on page 1-2.), package contents (“What’s in the Box” on page...

  • Page 14: System Requirements

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Delivers stable, application enhancing connections using Steady-Stream technology. • Wi-Fi Protected Access 2 (WPA2) encryption and authentication • RADIUS authentication support • Easy, Web-based setup for installation and management. • NetBIOS login capability •...

  • Page 15: What's In The Box

    • Warranty and Support Information Card. If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the router for repair. Front Panel of the RangeMax NEXT The front panel of the RangeMax NEXT houses three LEDS that display the status of power to the wireless access point, Ethernet connectivity and whether a wireless signal is being sent.
  • Page 16 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 1-1 You can use the status lights on the front of the wireless access point to verify various conditions described in the following table Table 1-1. Status Light Descriptions Label Activity Description Power On -- Green Solid...

  • Page 17: Technical Specifications

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Back Panel of the RangeMax NEXT The back of the WN802T contains the items listed below: 1 – Reset Button 2 – Ethernet Port 3 – Power Figure 1-2 Viewed from top to bottom: 1.

  • Page 18: Wall Mount Kit

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 1-3 Wall Mount Kit A Wall Mount kit that allows you to conveniently and securely mount your WN802T to a wall is included with your wireless access point. The kit includes a top and bottom bracket. Four screws are required to install the brackets and are not supplied with the kit.

  • Page 19: Installation And Configuration

    Chapter 2 Installation and Configuration This chapter describes how to set up your RangeMax NEXT Wireless-N Access Point for wireless connectivity to your LAN. This basic configuration will enable computers with 802.11b/g/Next or 802.11b/g wireless adapters to connect to the Internet, or access printers and files on your LAN. Note: Indoors, computers can connect over 802.11b/g/Next or 802.11b/g wireless networks at ranges of several hundred feet or more.

  • Page 20: System Requirements

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the WN802T. For complete performance specifications, see Appendix A, “Default Settings and Technical Specifications”. For best results, place your wireless access point: •...

  • Page 21: Configuring The Rangemax Next

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring the RangeMax NEXT Before installing the RangeMax NEXT Wireless-N Access Point, you should make sure that your Ethernet network is up and working. You will be connecting the access point to the Ethernet network so that computers with 802.11Next/b/g or 802.11b/g wireless adapters will be able to communicate with computers on the Ethernet network.
  • Page 22 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-1 3. Click OK. The main menu of the WN802T will display as shown in Figure 2-2. • When the wireless access point is connected to the Internet, you can select the Documentation link under the Web Support menu to view the documentation for the wireless access point.
  • Page 23 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-2 To configure the Basic LAN settings: 1. Select Basic Settings under Setup on left side of the main menu. The Basic Settings screen will display. The default settings should be suitable for most users and environments. Installation and Configuration v1.0, August 2007...
  • Page 24 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-3 2. Enter the Access Point Name of the WN802T. This unique name is the access point NetBIOS name. The Access Point Name is printed on the rear label of the WN802T. The default is netgearxxxxxx, where xxxxxxx represents the last 6 digits of the WN802T MAC address.

  • Page 25: Configuring Your Wireless Settings

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – Default Gateway. Enter the IP address of the gateway for your LAN. For more complex networks, enter the address of the router for the network segment to which the wireless access point is connected. The default is 0.0.0.0. –...
  • Page 26 SSID in order for the wireless device to communicate with the WN802T. If they do not match, you will not get a wireless connection to the WN802T. The default is NETGEAR. • Broadcast Wireless Network Name (SSID). If Enabled, the Wireless Access Point broadcasts its SSID allowing Wireless Stations which have a “null”...

  • Page 27: Verifying Basic Wireless Connectivity

    (shown by lost connections and/or slow data transfers). Should this happen, you may want to experiment with different channels to see which is the best. See the article on “Wireless Channels” available on the NETGEAR website. (A link to this article and other articles of interest can be found in Appendix B, “Related...

  • Page 28: Deploying The Rangemax Next

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Deploying the RangeMax NEXT Now that you have completed the setup steps, you can deploy the WN802T in your network. If needed, you can now reconfigure the computer you used in step 1 in “Configuring the RangeMax NEXT”...

  • Page 29: Configuring And Testing Your Pcs For Wireless Connectivity

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Step 1 Step 3 Step 2 Figure 2-5 Configuring and Testing Your PCs for Wireless Connectivity Program the wireless adapter of your PCs to have the same SSID and channel that you configured in Wireless Settings for the WN802T.

  • Page 30: Logging In To The Rangemax Next

    2. Connect to the WN802T by entering the default address of http://192.168.0.233 into your browser. http://192.168.0.233 http://192.168.0.233 Figure 2-6 1. NetBIOS name login is not supported in the initial release of the firmware. Check the Release Notes of your firmware version for NetBIOS support at http://kbserver.netgear.com/products/WN802T.asp. 2-12 Installation and Configuration v1.0, August 2007...
  • Page 31 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 3. The login screen will display. Enter admin for the user name and password for the password, both in lower case letters. Figure 2-7 4. Click OK. Your Web browser should automatically find the RangeMax NEXT and display the home screen, as shown in Figure 2-7 above.
  • Page 32 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 2-14 Installation and Configuration v1.0, August 2007...

  • Page 33: Wireless Security Settings

    Chapter 3 Wireless Security Settings Your wireless data transmissions can be received well beyond your walls by anyone with a compatible adapter. For this reason, use the security features of your wireless equipment. The RangeMax NEXT provides highly effective security features which are covered in detail in this chapter.

  • Page 34: Wep/Wpa Settings

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Use WPA-PSK or WPA2-PSK. Wi-Fi Protected Access (WPA) provides stronger data encryption than WEP. The very strong authentication along with dynamic per frame rekeying of WPA make it virtually impossible to compromise. The preshared key (PSK) is common to all users.
  • Page 35 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Data Encryption. The available options depend on the Network Authentication setting selected (see Table 3-1 above); otherwise, the default is None. The Data Encryption settings are explained in the table below: Table 3-1.

  • Page 36: Ssid And Wep/Wpa Settings Setup Form

    • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default WN802T SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below. ___________________________________ Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card.

  • Page 37: Configuring Wep

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring WEP To configure WEP data encryption: 1. Select WEP/WPA Settings under the Security menu on the left navigation pane. The WEP/ WPA Settings screen will display. Figure 3-2 2. Check the WEP radio button. The WEP Security Encryption options will display. Select the Authentication Type from the pull-down menu.
  • Page 38 See the document “Wireless Communications” for a full explanation of each of these options, as defined by the IEEE 802.11 wireless communication standard. A link to this document on the NETGEAR website is in Appendix B, “Related Documents.”...

  • Page 39: Configuring Wpa-Psk, Wpa2-Psk And Wpa-Psk + Wpa2-Psk

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2- Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above include the client software that supports WPA.

  • Page 40: Configuring Wpa With Radius, Wpa2 With Radius, And Wpa + Wpa2 With Radius

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 3-5 3. Enter the preshared key Passphrase (Network Key). 4. Click Apply to save your settings. Configuring WPA with Radius, WPA2 with Radius, and WPA + WPA2 with Radius In an organization with many wireless users, using a single preshared key may not be a practical security method.
  • Page 41 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 3-6 2. Select one of the following radio buttons: WPA with Radius, WPA2 with Radius, or WPA + WPA2 with Radius. Your selection will display. Figure 3-7 3. Click Apply to save your settings. A message appears informing you that you must configure the Radius Server Settings menu.

  • Page 42: Restricting Wireless Access By Mac Address

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Restricting Wireless Access by MAC Address By default, all wireless PCs that are configured with the correct SSID are allowed access to your wireless network. For increased security, you can restrict access to your wireless network to only those trusted wireless PCs based on their MAC address.
  • Page 43 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 5. The Trusted Wireless Stations table will display any wireless stations you have entered. If you have not entered any wireless stations this list will be empty. Note: If Turn Access Control On is enabled and the Access Control List is blank, then no wireless PCs will be able to connect to your wireless network To delete an existing entry: Check the radio button adjacent to the entry and then click Delete.
  • Page 44 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 3. Repeat these steps for each additional device you want to add to the Trusted Wireless Stations list. Note: The wireless stations must be selected and added one at a time to the Trusted Wireless Stations list.

  • Page 45: Management

    WN802T configuration settings you have made. The backup file can be used in this event. The default password for the WN802T is password. NETGEAR recommends that you change this password to a more secure password.

  • Page 46: Upgrading The Wireless Access Point Firmware

    The software of the RangeMax NEXT is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web site. If the upgrade file is compressed (.ZIP file), you must first extract the image (.img) file before sending it to the wireless access point.
  • Page 47 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-3 4. Click Browse and go to the location of the downloaded software upgrade file. 5. Click Upload. Warning: When uploading firmware to the wireless access point, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page.
  • Page 48 To restore settings from a backup file: – Click Browse under the Restore Saved Settings from a File heading. Locate and select the previously saved backup file (by default, netgear.cfg). – Click Retrieve. A window will appear with the message that the wireless access point has been successfully restored to its previous settings.

  • Page 49: Rebooting The Rangemax Next

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – A list of the factory default settings can be found in Appendix A, “Default Settings and Technical Specifications”. Warning: Do not try to go online, turn off the Access Point, shut down the computer or do anything else to the Access Point until it finishes restarting.

  • Page 50: Viewing The Statistics

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 2. Click Refresh to update the list and force the wireless access point to look for associated devices. Figure 4-6 • For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the device is allowed to communicate with the wireless access point or not).

  • Page 51: Configuring The Advanced Wireless Settings

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-7 • The Wired Ethernet section of the table displays traffic statistics for the wired Ethernet interface. • The Wireless section displays traffic statistics for the wireless interface. 2. Click Refresh to update the current statistics. Configuring the Advanced Wireless Settings We recommend that the Advanced Wireless Settings should be modified only by an administrator very familiar with the ramifications of changing the Wireless LAN parameters.
  • Page 52 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – With the CSMA/CA transmission mechanism, the transmitting station sends out an RTS packet to the receiving station, and waits for the receiving station to send back a CTS (Clear to Send) packet before sending the actual packet data. The default value is 2346.

  • Page 53: Configuring The Radius Server Settings

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-8 2. Make the changes to the Wireless LAN Settings based on the field descriptions outlined above. 3. Click Apply for your changes to take effect. Configuring the RADIUS Server Settings RADIUS (Remote Authentication Dial In User Service) is a protocol for managing Authentication, Authorization and Accounting (AAA) of multiple users in a network.
  • Page 54 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configure the RADIUS Server Settings menu with the parameters described in Table 4-1: Table 4-1. RADIUS Server Settings Fields Field Description Primary and Secondary The Authentication RADIUS Server provides authentication and access control. Authentication Servers The primary server is mandatory.
  • Page 55 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-9 2. Make the changes to the RADIUS Server Settings based on the field descriptions outlined above. 3. Click Apply for your changes to take effect. Management 4-11 v1.0, August 2007...
  • Page 56 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 4-12 Management v1.0, August 2007...

  • Page 57: Advanced Wireless Bridging

    Chapter 5 Advanced Wireless Bridging This chapter describes how to configure the advanced features of your WN802T to one of six Access Point Modes or in Wireless Bridge and Repeater Mode.These features can be found under the Advanced heading in the main menu on the Wireless Settings Wireless Bridging screens. The RangeMax NEXT Wireless-N Access Point lets you build large wireless networks.
  • Page 58 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 5-1 2. Under Advanced on the main menu, click Wireless Bridging. The Advanced Wireless Bridging screen will display showing the default settings for the wireless access point. 3. Select the Wireless Multi-Point Bridging radio button to enable multi-point bridging. 4.
  • Page 59 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual The following figure illustrates a multi-point bridge setup over three LAN segments. Point-to-Point Point-to-Point Wireless PC Card Bridge Mode Bridge Mode in a Notebook Computer Router Hub or Switch Multi-Point Internet Bridge Mode 192.168.0.1 Hub or Switch Segment 1...

  • Page 60: Configuring Repeater With Wireless Client Association

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • If using DHCP, all wireless access points should be set to “Obtain an IP address automatically (DHCP Client)” in the IP Address Source portion of the Basic IP Settings menu. • That all wireless access points are using the same SSID, Channel, WEP authentication mode, if any, and encryption (WPA is not available in bridge modes).
  • Page 61 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual To configure the WN802T in wireless repeater mode: 1. Open a web browser and log into the WN802T using the addressing scheme you have set up. Figure 5-3 2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen will display showing the default settings for the wireless access point.
  • Page 62 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual The following drawing illustrates two wireless access points daisy-chained together in wireless repeater mode Wireless PC Associated with AP1 AP in Repeater Mode with Client associations Router AP in Repeater Mode with Client associations Internet 192.168.0.1 Wireless PC...

  • Page 63: Troubleshooting

    Make sure the power cord is connected to the access point and plugged in to a working power outlet or power strip. • Make sure you are using the correct NETGEAR power adapter supplied with your access point; in this case the Switching Power Supply. The Ethernet light is not lit.

  • Page 64: I Cannot Configure The Access Point From A Browser

    If the Wireless LAN activity light stays off, disconnect the adapter from its power source and then plug it in again. • Contact NETGEAR if the WLAN light remains off. I cannot configure the access point from a browser. Check these items: •...

  • Page 65: When I Enter A Url Or Ip Address I Get A Timeout Error

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • The computer with the wireless adapter may not have the correct TCP/IP settings to communicate with the network. Restart the computer and check that TCP/IP is set up properly for that network. The usual setting for Windows on the Network Properties is set to “Obtain an IP address automatically.”...
  • Page 66 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Reset to Factory Defaults: This button can also be used to clear ALL data and restore ALL settings to the factory default values. These settings are shown in Appendix A, “Default Settings and Technical Specifications”.

  • Page 67: Default Settings And Technical Specifications

    Appendix A Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the RangeMax NEXT Wireless-N Access Point. Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults.
  • Page 68 Time Zone Adjusted for Daylight Saving Disabled Time Wireless Operating Mode 11b/g/Next (20/40 MHz) Wireless Communication Enabled Wireless Network Name (SSID) NETGEAR Broadcast Network Name SSID Enabled Security Disabled Transmission Speed Auto Country/Region United States (in North America; otherwise, varies by...

  • Page 69: Technical Specifications

    RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Technical Specifications Table A-2. WN802T Technical Specifications Parameter RangeMax NEXT Wireless-N Access Point 802.11Next Data Rates 7.2, 14.4, 21.7, 28.9,43.3, 57.8, 65, 72.2, 87.7, 115.6, 130 & 144.4 Mbps (20Hz) 15, 30, 45, 60, 90, 120. 135. 150, 180, 240, 270 & 300 Mbps (40Hz) 802.11b/g Data Rates 1, 2, 5.5, 11, 12, 18, 24, 36, 38, 54, &...
  • Page 70 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Default Settings and Technical Specifications v1.0, August 2007...

  • Page 71: Appendix B Related Documents

    Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP http://documentation.netgear.com/reference/enu/tcpip/index.htm Addressing Wireless Communications http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing a Computer for http://documentation.netgear.com/reference/enu/wsdhcp/index.htm...
  • Page 72 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Related Documents v1.0, August 2007...
  • Page 73 Index Numerics 11b/g/Next 4-8 Backup/Restore Settings 4-3 default mode 2-9 Basic Settings menu 2-5 11n 4-8 brackets 11Next 4-8 installing 2-10 wall mount 2-10 128-bit data encryption 3-5 Broadcast SSID 2-8 192.168.0.210 static IP, default 6-2 Broadcast Wireless Network Name 2-8 192.168.0.210, Static IP Address 2-3 192.168.0.230, default address 2-3 192.168.0.233...
  • Page 74 2-7 NetBIOS 2-6 login name 6-2 http //192.168.0.230 2-12 NetBIOS name default 6-2 logging in 2-12 NETGEAR interference sources 2-2 default SSID 2-8 IP Address Network Authentication 3-2 default 2-6, 2-12 types of 3-2 IP address New Password 4-2...
  • Page 75 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Repeater with Wireless Client Association 5-1, 5-4, 5-5 configuration of 5-5 package contents 1-3 example 5-6 Passphrase Reserve IP configuring 6-2 use with WEP 3-3 Reserve IP Address 2-12 used with WPA2-PSK 3-3 Reset Button used with WPA-PSK 3-3 reboot 6-3...
  • Page 76 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Wireless 4-7 Wireless Card Access Setup 3-11 subnet mask default 6-2 wireless configuring 802.11b/g modes 2-3, 2-7 system requirements 2-2 802.11b/g/Next mode 2-3, 2-7 wireless connectivity testing 2-9 TCP/IP Wireless Mode 2-8 troubleshooting 6-2 wireless mode Technical Specifications A-3...
  • Page 77 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual TKIP 3-7 WPA-PSK + WPA2-PSK 3-7 Index-5 v1.0, August 2007...
  • Page 78 RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Index-6 v1.0, August 2007...

This manual is also suitable for:

Wn802tv1 - wireless-n access pointWn802t-200 - wireless-n access point

Table of Contents