1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Access Point
  5. WN802T
  6. Reference manual

NETGEAR WN802T Reference Manual

Wireless-n access point
Hide thumbs Also See for WN802T:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
NETGEAR Wireless-N
Access Point WN802T v2

Reference Manual

(802.11bgn)
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10415-01
September 2008

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR WN802T

Summary of Contents for NETGEAR WN802T

  • Page 1: Reference Manual

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual (802.11bgn) NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10415-01 September 2008...

  • Page 2: Technical Support

    In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

  • Page 3: Regulatory Compliance Information

    Hereby, NETGEAR Inc., declares that this Radiolan is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los [Spanish] requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
  • Page 4 [Swedish] väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Íslenska Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við grunnkröfur og aðrar [Icelandic] kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de [Norwegian] grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

  • Page 5: Canadian Department Of Communications Radio Interference Regulations

    Canadian Department of Communications Radio Interference Regulations This digital apparatus (NETGEAR Wireless-N Access Point WN802T v2) does not exceed the Class B limits for radio- noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
  • Page 6 Product and Publication Details Model Number: Publication Date: Product Family: Product Name: Home or Business Product: Language: Publication Part Number: Publication Version Number: WN802T v2 September 2008 Wireless Access Point NETGEAR Wireless-N Access Point WN802T v2 Business English 202-10415-01 v1.0, September 2008...

  • Page 7: Table Of Contents

    How to Print this Manual ...xiv Revision History ... xv Chapter 1 Introduction About the NETGEAR Wireless-N Access Point WN802T v2 ...1-1 Key Features ...1-1 System Requirements ...1-3 What is in the Box ...1-3 Front Panel of the NETGEAR Wireless-N Access Point ...1-3 Back Panel of the NETGEAR Wireless-N Access Point ...1-6...
  • Page 8 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Chapter 3 Wireless Security Settings Wireless Security Options ...3-1 SSID and WEP/WPA Settings Setup Form ...3-5 RADIUS Server Settings ...3-6 Configuring Wireless Security ...3-6 Configuring WEP ...3-6 Configuring WPA with RADIUS ...3-8 Configuring WPA2 with RADIUS ...3-10...
  • Page 9 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The Ethernet light is not lit..6-2 The WLAN light is not lit..6-2 I cannot configure the access point from a browser..6-3 I cannot access the Internet or the LAN with a wireless capable computer..6-4 When I enter a URL or IP address I get a timeout error.
  • Page 10 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Contents v1.0, September 2008...

  • Page 11: About This Manual

    The NETGEAR ® Wireless-N Access Point WN802T v2 Reference Manual describes how to install, configure, and troubleshoot the NETGEAR Wireless-N Access Point WN802T v2. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: •...

  • Page 12: How To Use This Manual

    Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. • Scope. This manual is written for the NETGEAR Wireless-N Access Point according to these specifications: Product Version Manual Publication Date...

  • Page 13: Revision History

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual • Printing a Page in the HTML View. Each page in the HTML version of the manual is dedicated to a major topic. Use the Print button on the browser toolbar to print the page contents.
  • Page 14 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual About This Manual v1.0, September 2008...

  • Page 15: Introduction

    1-3). About the NETGEAR Wireless-N Access Point WN802T v2 The NETGEAR Wireless-N Access Point WN802T v2 is the basic building block of a wireless LAN infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped wireless notebook systems, desktop systems, print servers, and other devices.
  • Page 16 • Access control MAC address filtering. The access control MAC address filtering feature can ensure that only trusted wireless stations can use the WN802T v2 to gain access to your LAN. Local and remote MAC address authentication are supported. •...

  • Page 17: System Requirements

    The front panel of the NETGEAR Wireless-N Access Point houses three LEDs that display the status of power to the wireless access point, Ethernet connectivity and whether a wireless signal is being sent. To identify the status lights on the front panel of the WN802T v2 and verify connection refer to Table 1-1.
  • Page 18 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Figure 1-1 Front panel status LEDs You can use the status lights on the front of the wireless access point to verify various conditions described in the following table Table 1-1. Port and system LEDs...

  • Page 19: Back Panel Of The Netgear Wireless-N Access Point

    The back of the WN802T v2 contains the following listed items, viewed from top to bottom: Figure 1-2 Back panel of the WN80Tv2 1. The Reset button, which is used to reset the WN802T v2 or restore the factory default settings. Appendix A, “Default Settings and Technical Specifications”...
  • Page 20 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Figure 1-3 Label on back panel Introduction v1.0, September 2008...

  • Page 21: Installation And Configuration

    This chapter describes how to set up your NETGEAR Wireless-N Access Point WN802T v2 for wireless connectivity to your LAN. This basic configuration will enable computers with 802.11bgn or 802.11bg wireless adapters to connect to the Internet, or access printers and files on your LAN.

  • Page 22: Configuring The Netgear Wireless-N Access Point

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the WN802T v2. For complete performance specifications, see For best results, place your wireless access point: •...

  • Page 23: Configuring Your Basic Wlan Settings

    To log in and configure the WN802T v2 for LAN access: 1. Connect to the WN802T v2 by opening a browser window on your PC and entering http:// 192.168.0.233 in the address field. The WN802T v2 Login screen displays (see 2.
  • Page 24 2. Enter the Access Point Name of the WN802T v2. The access point name is printed on the back label of the WN802T v2. The default is netgearxxxxxx, where xxxxxx represents the last 6 digits of the WN802T v2 MAC address.
  • Page 25 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To select the local time zone: 1. Select Configuration > System > Basic > Time. The Time Settings screen displays. Figure 2-3 Local time zone settings 2. Configure the following information: –...
  • Page 26 Figure 2-4).The default settings should be suitable for most users and environments. Figure 2-4 Basic IP settings 2. Enter the IP Settings fields of the WN802T v2. – DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is disabled.

  • Page 27: Configuring Basic Wireless Settings

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual – Primary DNS Server. The WN802T v2 uses this IP address as the primary Domain Name server used by stations on your LAN. – Secondary DNS Servers. The WN802T v2 uses this IP address as the secondary Domain Name Server used by stations on your LAN.
  • Page 28 “infrastructure” mode, the SSID assigned to a wireless device must match the wireless access point SSID in order for the wireless device to communicate with the WN802T v2. If they do not match, you will not get a wireless connection to the WN802T v2. The default is NETGEAR.
  • Page 29 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual – If using multiple access points, it is better if adjacent access points use different channels to reduce interference. NETGEAR recommends a channel spacing of 5 channels (for example, channels 1, 6, and 11). between adjacent access points. –...

  • Page 30: Configuring Qos Settings

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Configuring QoS Settings WMM Support. Wi-Fi Multimedia (WMM) is a Quality of Service (QoS) feature and part of the 802.11e standard. It provides for prioritization of wireless data packets from different applications based on four access categories: voice, video, best effort, and background.

  • Page 31: Configuring Wmm Power Save

    (see Chapter 3, “Wireless Security 1. From a web browser, log in to the WN802T v2 using its default address of http:// 192.168.0.233. Use the default user name of admin and default password of password—or use a new LAN address and password if you have set them up (see 2.

  • Page 32: Deploying The Netgear Wireless-N Access Point

    WN802T v2 (see “Configuring Basic Wireless link and are able to obtain an IP address by DHCP from the WN802T v2, when DHCP is enabled. Note: If you are configuring the WN802T v2 from a wireless computer and you change the SSID, channel, or security profile settings, you will lose your wireless connection when you click Apply.

  • Page 33: Logging In To The Netgear Wireless-N Access Point

    WN802T v2 should be configured with an IP address that starts with 192.168.0.x and a subnet mask of 255.255.255.0. If DHCP is enabled, you can connect to the WN802T v2 after the DHCP server on your network assigns it a new IP address: Figure 2-7 Enable DHCP client Reserve an IP address (based on the WN802T v2’s MAC address) on the DHCP server.
  • Page 34 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 2. Connect to the WN802T v2 by entering the default address of http://192.168.0.233 into your browser. http://192.168.0.233 http://192.168.0.233 Figure 2-8 Default IP address of the WN802T v2 3. The login screen displays (see the password, both in lower case letters.

  • Page 35: Wireless Security Settings

    Restrict Access Based on MAC address. You can restrict access to only trusted PCs so that unknown PCs cannot wirelessly connect to the WN802T v2. MAC address filtering adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed.
  • Page 36 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual • Use WPA or WPA-PSK. Wi-Fi Protected Access (WPA) data encryption provides data security. The very strong authentication along with dynamic per frame rekeying of WPA make it virtually impossible to compromise. Because this is a new standard, wireless device driver and software availability may be limited.
  • Page 37 Consult the product documentation for your wireless adapter and WPA or WPA2 client software for instructions on configuring WPA2 settings. You can configure the WN802T v2 to use the types of network authentication shown in the following table: Table 3-1. Network Authentication Types...
  • Page 38 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual – Data Encryption. The available options depend on the Network Authentication setting selected (see Table 3-1); otherwise, the default is None. The data encryption settings are explained in the following table: Table 3-2. Data Encryption Settings...

  • Page 39: Ssid And Wep/Wpa Settings Setup Form

    • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default WN802T v2 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the following line.

  • Page 40: Radius Server Settings

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Record the WPA-PSK/WPA2-PSK key ___________________________________ • WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary _________________ Secondary __________________ Port: ___________________________________ Shared Secret: ___________________________________...
  • Page 41 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 2. From the Data Encryption drop-down menu, select encryption strength (64-bit, 128-bit, or 152-bit). For Open System, the default is None. If encryption is selected, fields for the passphrase and four keys display on the same screen (see Figure 3-2 WEP - Data encryption keys 3.

  • Page 42: Configuring Wpa With Radius

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes.
  • Page 43 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 4. Under the Configuration tab, select Security from the main menu, and then select Security Settings from the side menu. Figure 3-3 WPA with RADIUS security settings 5. Select WPA with RADIUS from the Network Authentication drop-down menu. Data encryption will be set to TKIP by default (see 6.

  • Page 44: Configuring Wpa2 With Radius

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Configuring WPA2 with RADIUS Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.

  • Page 45: Configuring Wpa And Wpa2 With Radius

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Configuring WPA and WPA2 with RADIUS Not all wireless adapters support WPA and WPA2. Client software is required on the client: • Vista, Windows XP and Windows2000 with Service Pack 3 or later, do include the client software that supports WPA/WPA2.

  • Page 46: Configuring Wpa-Psk

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 4. Under the Configuration tab, select Security from the main menu, and then select Security Settings from the side menu. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS from the list. By default, Data Encryption will be set to TKIP+AES.

  • Page 47: Configuring Wpa2-Psk

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To configure WPA-PSK: 1. From the Configuration menu select Security and from the side menu select Security Settings. 2. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data Encryption will be set to TKIP+AES (see 3.

  • Page 48: Configuring Wpa-Psk And Wpa2-Psk

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 2. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By default, Data Encryption will be set to TKIP+AES. (see 3. Enter the preshared key passphrase (Network Key). 4. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other.

  • Page 49: Restricting Wireless Access By Mac Address

    To restrict access based on MAC addresses: 1. Log in to the WN802T v2 using the default address of 192.168.0.233, user name of admin and default password of password, or whatever LAN address and password you have set up (see Figure 2-1).
  • Page 50 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Figure 3-9 Access control list 3. Check the Turn Access Control On checkbox to enable the access control feature. 4. Select the desired access control database from the Select Access Control Database drop- down menu.The options are:...
  • Page 51 10. Click Apply to save your wireless access control list settings. Now, only devices on this list will be allowed to wirelessly connect to the WN802T v2. Wireless Security Settings 3-17 v1.0, September 2008...
  • Page 52 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 3-18 Wireless Security Settings v1.0, September 2008...

  • Page 53: Management

    Changing the Administrator Password Note: Before changing the WN802T v2 password, use the backup utility to save your configuration settings. If you forget your new password, you must reset the WN802T v2 back to the factory defaults and use the default password.
  • Page 54 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Figure 4-1 Change password 2. Enter the current password, in the Current Password field. 3. Enter the new password, twice, in the New Password and Repeat New Password fields. 4. Click Apply to save your changes.

  • Page 55: Upgrading The Wireless Access Point Firmware

    The software of the NETGEAR Wireless-N Access Point is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Firmware upgrade files can be downloaded manually from the NETGEAR Web site. The upgrade file can then be sent using your browser as shown in the following steps.

  • Page 56: Configuration File Management

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 6. The WN802T v2 will check if the file is valid and load it in to the firmware. Once the file has been loaded the AP reboots. Warning: When uploading firmware to the WN802T v2, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page.

  • Page 57: Rebooting The Netgear Wireless-N Access Point

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The current settings are saved to a file under the default name Config. To restore settings from a backup file: 1. In Step 1 of the previous section, click Restore Settings on the side menu..
  • Page 58 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To reboot the wireless access point from the user interface: 1. From the main menu of the browser interface, select Maintenance > Reset and then Reboot AP on the side menu. The Reboot AP screen displays as follows:.

  • Page 59: Viewing The Available Wireless Stations List

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The factory settings are restored and the access point reboots. This takes about a minute. A list of the factory default settings can be found in the appendix Warning: Do not try to go online, turn off the Access Point, shut down the computer or do anything else to the Access Point until it finishes restarting.

  • Page 60: Viewing General Summary Information

    Available Wireless Station List. Viewing General Summary Information The System screen, under the Monitoring tab provides a summary of the current WN802T v2 configuration settings, including current IP and wireless settings. This information is read only, so any changes must be made on other screens.

  • Page 61: Viewing Network Traffic Statistics

    Disabled indicated a static IP configuration. Current Wireless Settings for 802.11b/bg/ng Access Point Mode Identifies the operating mode of the WN802T v2: Standard Access Point, Point to Multi-point bridge, or Repeater without wireless association Channel/Frequency Identifies the channel the wireless port is using. 11 is the default channel setting.
  • Page 62 The following table describes the information fields detailed on the Statistics screen: Table 4-2. Statistics Fields Field Description Wired Ethernet Packets The number of packets sent and received since the WN802T v2 was restarted. Bytes The number of bytes sent and received since the WN802T v2 was restarted. Wireless 11n/g...

  • Page 63: Configuring The Advanced Wireless Settings

    The total number of wireless packets sent and received since the WN802T v2 was restarted. Total Bytes The total number of wireless bytes sent and received since the WN802T v2 was restarted. Configuring the Advanced Wireless Settings NETGEAR recommends that the Advanced Wireless Settings should be modified only by an administrator very familiar with the ramifications of changing the wireless LAN parameters.
  • Page 64 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual The default value is 100 ms. • Aggregation Length. The default value is 65535 bytes. • AMPDU (Aggregated-MAC Packet Data Unit). This is a feature in IEEE 802.11e and 802.11n Wireless LAN Standard, which allows to build a group of frames before they are transmitted.

  • Page 65: Configuring The Radius Server Settings

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 2. Make the required changes or selections to the Wireless LAN Parameters section, based on the field descriptions outlined earlier. 3. Click Apply for your changes to take effect. Configuring the RADIUS Server Settings RADIUS (Remote Authentication Dial In User Service) is a protocol for managing Authentication, Authorization and Accounting (AAA) of multiple users in a network.
  • Page 66 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual • Authentication Server. This configuration is required for authentication using a RADIUS Server.The IP Address, Port Number, and Shared Secret are required for communication with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to use, if the Primary RADIUS Server fails.

  • Page 67: Radius Server Settings Fields

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual RADIUS Server Settings Fields Table 4-3. RADIUS server settings fields Field Description Primary and Secondary The Authentication RADIUS server provides authentication and access control. Authentication Servers The primary server is mandatory. A secondary server, which will be used if the primary server fails, is optional.
  • Page 68 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 4-16 Management v1.0, September 2008...

  • Page 69: Advanced Wireless Bridging

    This chapter describes how to configure the advanced features of your WN802T v2 to one of six access point bridge mode profiles, or in Wireless Bridge and Repeater Mode.These features can be found under the Wireless Bridge option on the Configuration menu.
  • Page 70 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To configure wireless Point to Multi-point Bridging: 1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set Figure 5-1 Enable wireless bridging and repeating 2.
  • Page 71 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual 7. Enter the MAC (physical) address of the other bridge mode wireless access point in the Remote MAC Address field. Figure 5-2 Edit security profile 8. Under Authentication Settings, select one of the network authentication types from the Network Authentication drop-down menu (one of the supported types—WEP, WPA-PSK, or...
  • Page 72 192.168.0.1 Segment 1 Figure 5-3 Multi-point bridge configuration To configure wireless access points in a multi-point configuration: 1. Set the Operating Mode of the three NETGEAR Wireless-N Access Points as follows (see Figure 5-1): • Configure AP2 on LAN Segment 1 in Point to Multi-Point Bridge Mode. Add the Remote MAC Address of AP1 on LAN Segment 2.

  • Page 73: Configuring Repeater Without Wireless Client Association

    Configuring Repeater without Wireless Client Association In this mode, the WN802T v2 will operate as a Repeater only, and send all traffic to the remote wireless access point. You must enter the MAC (physical) address of the remote wireless access point.
  • Page 74 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual To configure the WN802T v2 in wireless repeater mode: 1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set Figure 5-4 Repeater without wireless association 2.
  • Page 75 Enable the profile now if you wish to. 13. Click Apply to save your changes. To configure a LAN segment utilizing the WN802T v2 in Repeater Mode: 1. Configure the Operating Mode of the NETGEAR Wireless-N Access Points. •...
  • Page 76 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Advanced Wireless Bridging v1.0, September 2008...

  • Page 77: Troubleshooting And Help

    Troubleshooting and Help This chapter provides information for troubleshooting issues with your NETGEAR Wireless-N Access Point WN802T v2 and how to avail the help features and options provided. Offline help Offline Help is available for each page by clicking the small “?” symbol at the top right corner of the current screen information.

  • Page 78: Troubleshooting

    Make sure the power cord is connected to the access point and plugged in to a working power outlet or power strip. • Make sure you are using the correct NETGEAR power adapter supplied with your access point; in this case the Switching Power Supply. The Ethernet light is not lit.

  • Page 79: I Cannot Configure The Access Point From A Browser

    I cannot configure the access point from a browser. Check these items: • The WN802T v2 is properly installed, LAN connections are OK, and it is powered on. Check that the LAN port LED is blinking green to verify that the Ethernet connection is OK. •...

  • Page 80: I Cannot Access The Internet Or The Lan With A Wireless Capable Computer

    Primary and Secondary DNS Server Addresses. • If the computers are configured correctly, but still not working, ensure that the WN802T v2 is connected and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN and power connections.

  • Page 81: Online Help

    3. Release the Reset button. The factory default configuration has now been restored, and the WN802T v2 is ready for use. Online Help For more help, click Support on the main menu when the access point is connected to the internet...
  • Page 82 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Troubleshooting and Help v1.0, September 2008...

  • Page 83: Default Settings And Technical Specifications

    Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the NETGEAR Wireless-N Access Point WN802T v2. Factory Default Settings You can use the Reset button located on the front of your device to reset all settings to their factory defaults.

  • Page 84: Technical Specifications

    NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Table A-1. Access Point Default Configuration Settings Feature DHCP Client Time Zone Time Zone Adjusted for Daylight Saving Time Wireless Operating Mode Wireless Communication Wireless Network Name (SSID) Broadcast Network Name SSID...
  • Page 85 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Table A-2. WN802T v2 Technical Specifications (continued) Parameter NETGEAR Wireless-N Access Point WN802T v2 802.11bg Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 & 54 Mbps (Auto-rate capable) 802.11b/bg/ngb...
  • Page 86 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Default Settings and Technical Specifications v1.0, September 2008...

  • Page 87: Appendix B Related Documents

    This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Internet Networking and TCP/IP Addressing Wireless Communications Preparing a Computer for Network Access Virtual Private Networking (VPN)
  • Page 88 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual Related Documents v1.0, September 2008...
  • Page 89 Numerics 20 MHz legacy mode static 2-9 20/40 MHz compatibility mode, dynamic 2-9 40 MHz high-throughput, static 2-9 802.11 IEEE standard 3-7 802.11b mode legacy 2-8 set 2-8 settings 2-7 standard access point 5-1 802.11b/bg/ng compatibility, wireless adapter 2-2 mode current settings 4-9 encryption strength A-3 operating frequencies A-3...
  • Page 90 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual unauthorized 2-1 access control available wireless stations 3-16 enable 3-16 MAC address database, local 3-16 MAC address database, remote 3-16 MAC address filtering 1-2 trusted wireless stations 3-16 access control list 3-15...
  • Page 91 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual wireless, test 2-12 connectivity area see range country/region 2-4, 4-8 default setting A-2 coverage wireless network 1-1 CSMA/CA RTS threshold 4-11 CSMA/CD RTS threshold 4-11 CTS packet 4-11 Customer support 1-iii data encryption. See encryption data rate 2-9 data security.
  • Page 92 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual front panel 1-2 guard interval 2-9 Help offline 6-1 online 6-5 high-throughput mode static 2-9 hotspot wireless client security separation 3-5 to 3-15 interference electromagnetic 1-1 guard interval 2-9 sources 2-2 what to do if 2-8...
  • Page 93 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual see also passphrase 3-14 WPA2-PSK 3-14 WPA-PSK/WPA2/PSK 3-15 network key/passphrase 3-4 NTP client enable 2-5 NTP Server custom 2-5 NTP server hostname/IP address 2-5 open authentication 3-1 open system 3-3, 3-5, 3-6, 3-7...
  • Page 94 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual factory default settings 4-6 saved settings 4-5 RIFS 4-12 RTS packet CSMA/CA 4-11 RTS threshold 4-11 default value 4-11 security 3-2 access control list 3-15 change, settings 2-12 class 1-2 connection time 2-2...
  • Page 95 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual upgrade firmware 4-3 user name default 2-3, 2-11, 2-14 users maximum 1-1 warranty 1-3 WEP 3-1 configure 3-6 wireless connection, lose 3-15 connectivity, test 2-11, 2-12 wireless access by MAC address restricting 3-15...
  • Page 96 NETGEAR Wireless-N Access Point WN802T v2 Reference Manual WPA2-PSK 3-3 configure 3-13 WPA-PSK 3-3 configure 3-12 restrictions 3-12 WPA-PSK/WPA2-PSK 3-3 configure 3-14 Index-8 v1.0, September 2008...

This manual is also suitable for:

Wn802tv2 - wireless-n access pointWn802t-200nas

Table of Contents