Grizzly G4015Z Owner's Manual page 38

gear support arm and loosely fasten the
Bushing
assembly to the tee-nut using the cap screw.
Figure 41 shows the proper sequence. Slide
Tee-Nut
the combination gear along the slot in the
support arm until gear C meshes with gear
D, as in Figure 42, and tighten the cap
screw.
Rotate the support arm until gears B and A
8.
are in mesh. Tighten the cap screw at the
Slot
bottom of the gear support arm. Figure 43
Gear
shows the gears properly aligned and in
Support Arm
mesh.
Combination
Gear
Figure 41. Flats on bushing align with slot.
Figure 42. Cut-away shows Gear C and D in mesh.
Figure 43. Gears aligned and in mesh.
G4015 Lathe/Mill -35-