Baumatic AS19SS-A Instruction Manual page 18

REMOVING THE OVEN DOOR INNER GLASS PANEL (fig. 1-2)
Do not use any abrasive medium that could cause damage.
Remember that if the surface of the glass panel becomes scratched,
this could lead to a dangerous failure.
To remove the oven door inner glass panel, use a coin to perform
a levering action in the two grooves (A) until the two pins (B) are
released from their housing (fig. 1).
Then raise the glass as shown in fig. 2 and take it out from the top.
To refit the door, repeat the two previous operations in reverse.
Reinsert the glass by resting it on the inner door and pushing it in.
Press on the glass until the pins slot back into their initial position (fig. 2).
Care must be taken when cleaning between the door glasses, and
inside the inner frame as some of the edges maybe sharp due to
the manufacturing process.
16