Table of Contents
Advertisement
END OF COOKING SEMIAUTOMATIC OPERATION
For fixed-time cooking
Switch on the oven; press button
23h59m, with buttons - and +. Wait until the 2 dots on the timer display stop flashing and
the timer shows the current hour; then select an available cooking function: the oven will suggest
a preset temperature, which can be changed using buttons
on the timer display stop flashing, then the timer shows the current hour and the oven
starts cooking. When the fixed time has elapsed, the oven stops cooking.
AUTOMATIC OPERATION
For fixed-time cooking
Switch on the oven; press button
Wait until the 2 dots on the timer display stop flashing, then the timer shows the current hour;
then press button
the timer shows the current hour, then select an available cooking function: the oven will
suggest a preset temperature, which can be changed using buttons
dots on the timer display stop flashing, the oven begin the delayed start mode: then, it will
automatically start for the requested duration and stop at the requested time. During the delayed
start phase, both the temperature and the function will remain displayed and they can be changed.
When the time of cooking is over, a triple acoustic signal starts while temperature and functions
displays go off, the timer display shows the time and the two Pot and Auto symbols start flashing.
To reset the oven, press any of these buttons:
and the oven is ready to receive new commands; it is possible to immediately select a new cooking
function, or switch the oven off.
TIMER DISPLAY SYMBOLS
Pot: when it lights up, it indicates that a cooking function is on, even in manual mode.
The pot does not light up when "light", "preheating" and "defrost" functions are activated.
When the pot is flashing, it indicates that the time cooking is over.
During the delayed start phase, it remains off and then lights up again when the cooking time
has been completed.
A (auto): when it lights up, it indicates that a cooking time setup has been selected (in other
words, the oven is not in manual mode). When flashing, it means that the cooking time is over.
Bell: when it lights up, it indicates that the minute minder is on. When flashing, it indicates
the end of the minute count.
SELECTING THE COOKING TEMPERATURE
When using buttons
for each cooking mode with +/- 5 degrees increases (shown on the temperature display).
SELECTING THE COOKING MODE
When using buttons
10
and set the end of cooking time, within the next 23h59m,
and set the required cooking time with buttons - and +.
and set the end of cooking time with buttons - and +. Wait again until
and
, the temperature increases between the low and high setting
and
, the program icons light up alternately from left to right.
and
; wait until the 2 dots
and
. When the 2
; the acoustic signal stops
Hide quick links:
Advertisement
Table of Contents
