Baumatic AS19SS-A Instruction Manual page 15

OTHER FUNCTIONS
OVEN OFF MODE
W hen no function is selected, the temperature and program displays are off and
the timer displays the time.
"CHILDREN CARE" - CONTROLS LOCK FUNCTION
Hold down button
function; the display will show "
The time is then displayed again.
If the locking function is activated after any one of the cooking setups (manual,
semiautomatic, automatic), it will be possible only to set the minute minder or to switch
off the oven. By pressing any other key, the "
is activated. If manually or automatically switched off, the controls lock will not be deactivated.
To disable the key, press button
and then "OFF". The time is then displayed again.
when the oven is locked, it will not be possible to switch it on with button
OFF BUTTON
When used for switching off the oven, button
function, even over the Controls Lock.
OVEN LIGHT CONTROL
When the required function is selected, the oven light will stay on during the preheating
and it will turn off 3 minutes after the ond of the preheating. The oven light will switch on
again when any of these buttons are pressed:
3 minutes. If the children care function is activated, the light goes on and the "
symbol will start flashing.
PREHEATING
When preheating, in other words when the oven is heating up to reach the required
temperature without actually reaching it yet, the temperature indicator " ° " will flash.
This symbol " ° " will be on continuosly in all other cases, for example: when the oven
is holding the temperature previously reached, or when the oven is cooling to reach
a temperature set lower than the initial value.
TIMER RESET
With the oven switched on, it is possible to reset the settings of the timer (end of cooking
time and cooking time) by pushing together buttons
the oven automatically remains switched on manual operation for an indefinite time;
otherwise it is possible to switch off the oven to reset all settings.
.
for at least 3 seconds: the oven will be set on "children care"
for at least 3 seconds. The display will show "
" and then " On ".
" display will remember the lock function
(ON/OFF) has priority over any other
and
(ON/OFF).
and it will then turn off after
:
"
"
13