Problems With Date And Time; Restore The Default Configuration And Password - NETGEAR MBR1516 User Manual

Problems with Date and Time

The Email screen displays the current date and time of day. The Mobile LTE Broadband 11n
Wireless Router uses the Network Time Protocol (NTP) to obtain the current time from one of
several network time servers on the Internet. Each entry in the log is stamped with the date
and time of day. Problems with the date and time function can include the following:
• Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that
your Internet access settings are configured correctly. If you have just completed
configuring the router, wait at least 5 minutes, and check the date and time again.
• Time is off by one hour.
Cause: The router does not automatically sense daylight saving time. On the E-mail
screen, select or clear the Automatically adjust for Daylight Savings Time check box.

Restore the Default Configuration and Password

This section explains how to restore the factory default configuration settings, changing the
router's admin password to password and the IP address to www.routerlogin.net. You can
erase the current configuration and restore factory defaults in two ways:
• Use the Erase feature (see
• Press the Restore Factory Settings button on the bottom of the router for 6 seconds.
Use this method for cases when the administration password or IP address is not known.
The factory default settings are shown in
Mobile LTE Broadband 11n Wireless Router MBR1516
Erase on page 61).
Factory Default Settings
Troubleshooting
97
on page 99.