NETGEAR MBR1516 User Manual page 57

Mobile LTE Broadband 11n Wireless Router MBR1516
• Mobile Broadband Modem. This shows the properties of the mobile broadband
modem.
- Modem Identity. Shows the modem in use.
- Modem SW version. The software version of the modem.
- Modem driver version. The driver version of the modem.
- IMEI. International Mobile Equipment Identity. The unique identity of the modem.
- Operator. The ISP for the broadband wireless network.
- Network mode. The mode of the current network the modem is connected to.
This is dependent on coverage and distance from the cell site.
• Wireless Broadband Port. The current settings of mobile broadband port.
- Connection Status. This shows the status of the wireless broadband connection.
- IP Address. The IP address being used by the Internet (WAN) port of the router.
If no address is shown or the address is 0.0.0, the router cannot connect to the
Internet.
- Protocol. This shows if the router is using a fixed IP address on the WAN. If the
value is DHCP Client, the router obtains an IP address dynamically from the ISP.
- IP Subnet Mask. The IP subnet mask being used by the Internet (WAN) port of
the router.
- Domain Name Server. The Domain Name Server addresses being used by the
router. A Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
• LAN Port. These are the current settings, as set in the LAN Setup screen.
- MAC Address. The Media Access Control address. This is the unique physical
address being used by the Ethernet (LAN) port of the router.
- IP Address. The IP address being used by the Ethernet (LAN) port of the router.
The default is 192.168.0.1.
- DHCP. Identifies whether the router's built-in DHCP server is active for the
LAN-attached devices.
- IP Subnet Mask. The subnet mask associated with the LAN IP address.
• Wireless Port. These are the current settings, as set in the Wireless Settings screen.
- Name (SSID). The SSID of the router.
- Region. The location (country).
- Channel. The current channel in use.
- Wireless AP. Indicates if the access point feature of the router is enabled or not.
If not enabled, the WiFi LED on the front panel is off.
- Broadcast Name. Indicates if the router is broadcasting its SSID.
Administration
57