NETGEAR MBR1516 User Manual page 9

Mobile LTE Broadband 11n Wireless Router MBR1516
Table 1 describes each LED and button located on the front panel of the router.
Table 1. LED descriptions
LED Activity
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see
(WPS) Method
WiFi On/Off This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for WiFi radio only.
Power Solid green
Solid amber
Off
Internet Port Solid green
Solid amber
Blinking green
Blinking amber
Blinking green and amber Failover from Ethernet WAN to mobile broadband.
Off
WiFi Solid blue
Blinking blue
Off
LAN Ports Solid green
Blinking
Off
WAN Port Solid green
Blinking
Off
SMS Solid green
Off
Description
on page 20.
The router is turned on and operating normally.
POST (power-on self-test) is in progress.
Power is not supplied to the router.
There is an Internet session.
Traffic meter limit has been reached; traffic is blocked.
Data is being transmitted over the Internet connection.
Traffic meter limit has been reached, but traffic is not blocked.
No Internet connection is detected.
The WiFi local port is initialized.
Data is being transmitted or received over the WiFi link.
The wireless access point is turned off.
The local Ethernet ports have detected wired links with computers.
Data is being transmitted or received.
No link is detected on these ports.
The Ethernet WAN port has detected an active link.
Data is being transmitted or received.
No link is detected on these ports.
SMS messages are waiting.
There are no unread SMS messages.
Hardware Setup
9
Wi-Fi Protected Setup