Label; Restore Factory Settings - NETGEAR MBR1516 User Manual

Mobile LTE Broadband 11n Wireless Router MBR1516

Label

The label on the side of the router shows the router's MAC address, serial number, security
PIN, IMEI or ESN number, and factory default login information. It also contains the SSID and
passphrase that are unique to each router.
Default access address, user name,
and password
Restore
Factory
Settings:
Press for
6 seconds.
Figure 4. The label shows unique information about your router

Restore Factory Settings

Locate the small hole outlined in red on the side of the router. Insert a paper clip into the hole
and press for 6 seconds. Pressing the Restore Factory Settings button causes the LED to
blink briefly. After the button is held down for more than 6 seconds, the Power LED flashes
amber, and then turns green as the router resets to the factory defaults. See
Settings on page 99 for information about the factory default settings.
Direction of SIM card insertion
Router label
with unique
SSID and
passphrase
Hardware Setup
11
Router information
- WPS Security PIN
- IMEI or ESN number
- Serial number
- MAC address
Factory Default