Opening The System Unit - HP Model 715/100XC - Workstation Handbook

Opening the System Unit

Before opening the system unit, remove the floor stand. If a sticker is covering the
handle, remove it.
Slide the handle latch to the open position and carefully lift the top cover to fully open
the system unit, as shown in Figure 5–5.
NOTICE:
5–8 Field Replaceable Units
Figure 5–5. Opening the System Unit
When you close the system unit, take care that you do
not bend the EMI shields where the bottom and top
covers join. When closing the system, slide the handle
latch to the lock position as shown on the handle label.