HP Model 715/100XC - Workstation Handbook page 76

The following messages appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
Verification has started on device (0/0/0).
Verification has started on device (2/0/1.0.0).
Verification has started on device (2/0/1.5.0).
Verification has started on device (2/0/1.6.0).
Verification has started on device (2/0/2).
CSTM>Message from (0/0/0):
This graphics test displays a number of graphics images on the screen of the graphics
device being tested. If an X server is not currently running on that display, X Win-
dows will be started and run for the duration of the test. The Starbase shared li-
brary (/usr/lib/libsbisl) should be present to run this test.
CAUTION: This test will fail if any portion of the test window is modified or over-
laid in any way.
NOTE: If a VUE login screen is currently displayed on the monitor, the test will wait
until someone logs in the HP VUE on the graphics monitor to release the lock. The
test stops if the Screen Saver times out, it runs again once the Screen is activated.
WARNING: Do not run this exercise with any other option.
(Type 'R' for Ready, Type 'S' for Skip) [R] >>
Verification of (2/0/1.0.0) has completed.
Verification of (2/0/1.5.0) has completed.
Verification of (2/0/1.6.0) has completed.
Verification of (CPU) has completed.
Verification of (FPU) has completed.
Verification of (2/0/2) has completed.
Verification of (0/0/0) has completed.
Typing at the completion of the tests returns the
Return
the following:
CSTM>
If any tests fail, further diagnosis is necessary.
4–22 Troubleshooting
Result status – (Success).
Result status – (Success).
Result status – (Success).
Result status – (Success).
exit
Return
Return
Result status – (Success).
Result status – (Success).
Result status – (Success).
CSTM>
prompt. Now type