Advanced Wps Settings - NETGEAR WNR612v2 - Wireless-N 150 Router User Manual

Wireless-N 150 Router WNR612v2 User Manual
Select Wireless Settings under Advanced in the main menu. The advanced Wireless
2.
Settings screen displays:
The available settings in this screen are:
Enable Wireless Router Radio. If you disable the wireless router radio, wireless
•
devices cannot connect to the wireless router. If you will not be using your wireless
network for a period of time, you can clear this check box and disable all wireless
connectivity.
Fragmentation Length, CTS/RTS Threshold, and Preamble Mode. The
•
Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options are
reserved for wireless testing and advanced configuration only. Do not change these
settings.
Transmit Power Control. There are four different settings for transmit power control:
•
100% (the default), 75%, 50%, and 25%.
WPS Settings. For information about these settings, see
•
(WPS) to Configure Your Wireless Network
Wireless Card Access List. For information about this list, see
•
Access by MAC Address
.

Advanced WPS Settings

On the Advanced Wireless Setting screen, these WPS Settings are available:
Router's PIN. The PIN is displayed so that you can use it to configure the router
•
through WPS (Wi-Fi Protected Setup). It is also displayed on the router's label.
Disable Router's PIN. If the router's PIN is disabled, you cannot configure the
•
router's wireless settings with WPS. However, if your settings are already configured,
you can still add WPS-enabled wireless clients. The router might disable the PIN if it
detects suspicious attempts to break into your wireless settings; this can happen if the
on page 18.
on page 24.
Chapter 2: Wireless Configuration
Using Push 'N' Connect
Restricting Wireless
| 23