NETGEAR WNR3500Lv1 Setup Manual page 6

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
To prepare your router for installation:
1. Carefully peel off the protective film covering both sides of your router (see
Figure 1
Set up your N300 Wireless router by inserting the tabs of the stand (supplied with your router)
2.
into the slots on the bottom of your router as shown in
film covering the status light panel of the router.
Figure 2
Getting to Know Your Wireless Router
Figure 2. Then, remove the protective
Figure 1).
2