NETGEAR WNR3500Lv1 Setup Manual page 19

Figure 10
Start your network in the correct sequence, as described in
7.
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
To replace your wireless router:
Turn off and unplug the power from your broadband cable modem or DSL modem.
1.
2. Remove both Ethernet cables from your existing router (but leave both cables attached to your
computer and your modem).
Locate the Ethernet cable (A) that is still attached to your computer. Securely insert the other
3.
end of the Ethernet cable into a LAN port on your new router, such as port 4 (E), as shown in
Figure 11.
Connect any additional wired devices to your new router by inserting an Ethernet cable from a
device into one of the three remaining LAN ports.
Manually Installing Your Router
"To start your network:".
15