Installing Your Router Using The Smart Wizard; Using The Smart Wizard - NETGEAR WNR3500Lv1 Setup Manual

N300 wireless gigabit router

Hide thumbs Also See for WNR3500Lv1:

Datasheet (3 pages)

Installation manual (2 pages)

Table Of Contents

Table of Contents

The Smart Wizard setup procedure should take about 15 minutes to complete. Before using the

Smart Wizard, ensure that:

•

You are using a PC with either a Mac operating system or a Windows operating system

(Windows 7, Windows Vista, Windows 2000, or Windows XP with Service Pack 2); and a

wired Ethernet connection, not a wireless connection.

•

You have an Internet service connection through an Internet Service Provider (ISP).

•

You have the configuration information provided by your ISP.

Using the Smart Wizard

The NETGEAR Smart Wizard takes you through the procedure to connect your router, modem,

and PCs. It then helps you to configure your wireless settings and enable wireless security for your

network. The Smart Wizard guides you through the setup process by automating many of the

steps. At each step in the setup process, the Smart Wizard checks to ensure that the steps you

perform are successfully completed.

To set up your router using the Smart Wizard:

To start the Smart Wizard:

•

For Windows users,

–

Insert the Resource CD into your PC. The CD will automatically start and detect the

language you are using on your PC. Select a different language option, if you prefer.

–

In the CD's menu, click Setup to start the Smart Wizard.

•

For Mac users, double-click the MacWizard program.