Cisco UC560-FXO-K9 Quick Start Manual page 8

Feature
Music-on-Hold (MoH)
audio port
Console port
WAN 10/100/1000
Ethernet port
PC 10/100/1000
expansion port
(PC/EXP)
10/100/1000 Expansion
ports (2)
Line (FXO) ports
Phone (FXS) ports
ISDN Basic Rate
Interface (BRI) ports
IOS Compact Flash
Voicemail Compact
Flash
(Optional) Two Voice
Interface Card (VIC)
expansion slots
6 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
Description
Connects to an audio device (such as an MP3 player or
radio) to provide streaming audio for music on hold.
Connects the UC 560 to a console PC to provide
access to the CLI. This port can also be used for
connecting to the CLI through a modem.
Recommended for advanced users or for device
access recovery purposes.
Provides dedicated WAN (Internet) access. Connects
to a DSL router, cable modem, or other WAN
connectivity devices
LAN port that connects to a laptop or PC used for
configuring the UC 560. This port can also be used as
an expansion port.
Connects to switches that have ports for phones or
data devices. (We recommend that you connect the
UC 560 to a Cisco ESW 500 Series switch.)
Connects your phone system to the PSTN.
(Only applies to models UC560-FXO-K9 and
T1E1-K9)
If the power fails, you can still make and receive
emergency calls if you have a telephone line
connected to the Line (FXO) port 0 and an analog
phone connected to the Phone (FXS) port 3, even if the
unit is not powered on.
Connects directly to an analog telephone, fax machine,
or similar device.
Connects the UC 560 to an Integrated Services Digital
Network (ISDN). Only applies to model UC560-BRI-K9.
Storage that contains the UC 560 software image and
default configuration values and phone software.
Storage that contains the voicemail software,
embedded application software, and stored
messages.
Provides connectivity to a Public Switched Telephone
Network (PSTN) for additional phone ports.
UC560-