Installing the Compact Flash Guard
The compact flash (CF) guard provides protection for the compact flash
memory.
To install the CF-guard:
Locate the compact flash slot of the front of the UC 560. See
S
1
TEP
Panel, page
Slip the right tab on the CF-Guard into the slot on the right side of
S
2
TEP
the compact flash opening.
Place the cover against the surface of the memory slot, aligning
S
3
TEP
the attachment screw on the left side of the CF-Guard with the
screw hole in the panel.
Tighten the attachment screw on the left side of the CF-guard by
S
4
TEP
using the supplied T5 Torx wrench.
Do not remove the CF-guard when the UC 560 is powered on
C
AUTION
and running.
Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
5.
Front
11