Verifying The Hardware Installation - Cisco UC560-FXO-K9 Quick Start Manual

5
Verifying the Hardware
Installation
To verify the hardware installation, complete the following tasks:
• Check the status of the UC 560 by looking at the LEDs on the front panel
See LEDs, page
• Check that the switch is connected is connected to the expansion port.
• To test IP connectivity, launch a Web browser and enter
http://192. 1 68. 1 0. 1
means that your system is active.
• Make sure that each connected IP phone displays an internal extension
number or a line number, on at least one of the phone line buttons. Verify
the phone connectivity by making a call from one phone to another.
If you need help resolving a problem, go to the Cisco Small
N
OTE
Business Support Community website at:
go/smallbizsupport. For technical documentation and other links,
see Suggested Next Steps, page 19
Here, page
14 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
7.
. When the authentication window appears, this
20.
http://www.cisco.com/
and Where to Go From