Cisco UC560-FXO-K9 Quick Start Manual page 20

Click Next and follow the prompts to complete the installation.
S 1
TEP
After the wizard completes:
S 2
TEP
• Verify Internet connectivity by going to: http://www.cisco.com.
• Test calls to and from the PSTN.
• Test calls to voice mail and Auto Attendant (AA), if configured.
• Verify that the IP phones show the correct date and time.
The Wizard requires that you change the default administrator
N
OTE
login and password. Use the new username and password to
access and administer the UC 560.
Congratulations! The basic installation of the UC 560 is complete.
18 Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide