Table of Contents
Advertisement
Provisioning Field Reference
Configuration Profile Parameters
Cisco Small Business IP Telephony Devices Provisioning Guide
Parameter Name
Resync_Periodic
Resync_Error_Retry_Delay
Forced_Resync_Delay
Description and Default Value
The time interval between periodic resyncs
with the provisioning server. The associated
resync timer is active only after the first
successful sync with the server.
Set this parameter to zero to disable
periodic resyncing.
The default value is 3600 seconds.
Resync retry interval (in seconds) applied in
case of resync failure.
The device has an error retry timer that
activates if the previous attempt to sync
with the provisioning server fails. The
device waits to contact the server again
until the timer counts down to zero.
This parameter is the value that is initially
loaded into the error retry timer. If this
parameter is set to zero, the device
immediately retries to sync with the
provisioning server following a failed
attempt.
The default value is 3600 seconds.
Maximum delay (in seconds) the IP
Telephony Device waits before performing
a resync.
The device does not resync while one of its
phone lines is active. Because a resync can
take several seconds, it is desirable to wait
until the device has been idle for an
extended period before resyncing. This
allows a user to make calls in succession
without interruption.
The device has a timer that begins counting
down when all of its lines become idle. This
parameter is the initial value of the counter.
Resync events are delayed until this counter
decrements to zero.
The default value is 14,400 seconds.
4
83
Advertisement
Table of Contents
