Table of Contents
Advertisement
Provisioning Tutorial
Basic Resync
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco Small Business IP Telephony Devices Provisioning Guide
Exercise
Using the PC web browser, open the admin/advanced page, Provisioning tab.
Define the Profile_Rule parameter.
The following value assumes a TFTP server IP address of 192. 1 68. 1 .200:
tftp://192.168.1.200/basic.txt
In the Resync_Periodic parameter enter a small value for testing such as 30
(meaning 30 seconds).
Click Submit all Changes.
With the new parameter settings, the IP Telephony Device now resyncs to the
configuration file specified by the URL twice a minute.
Observe the resulting messages in the syslog trace.
Ensure that the Resync_On_Reset parameter is set to yes.
Power cycle the IP Telephony Device.
The IP Telephony Device also automatically resyncs to the provisioning server
whenever it is power-cycled.
If the resync operation fails for any reason, such as if the server is not responding,
the unit waits the number of seconds defined in Resync_Error_Retry_Delay before
attempting to resync again. If Resync_Error_Retry_Delay is zero, the IP Telephony
Device does not try to resync following a failed resync attempt.
(Optional) Verify that the value of Resync_Error_Retry_Delay is set to a small
number, such as 30, disable the TFTP server, and observe the results in the syslog
output.
3
66
Advertisement
Table of Contents
