Managing The Audio Source And Volume; Adjusting Call Volume; Adjusting The Ringer Volume; Using Mute - Cisco SPA501 User Manual

Using Basic Call Management Functions

Managing the Audio Source and Volume

Managing the Audio Source and Volume
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

Adjusting Call Volume

To adjust the volume of the handset or speaker, lift the handset or press the
Speaker button. Press + on the Volume button to increase the volume, or press - to
decrease the volume. Press Save. (Not available for the Cisco SPA501G.)

Adjusting the Ringer Volume

To adjust the ringer volume, press + on the Volume button to increase the volume,
or press - to decrease the volume when the handset is on-hook and the speaker
button is off. Press Save. (Not available for the Cisco SPA501G.)

Using Mute

To mute the handset, speaker, and headset microphones, press Mute. The button
lights red. Press Mute again to unmute.
If no audio device is on, pressing Mute has no effect. When switching from the
speaker phone to the handset, the phone is unmuted automatically.

Using the Speakerphone

To use the speakerphone, press Speaker (the handset can be either on or off
hook).

Using the Headset with Your IP Phone

Install the headset as described in the
Headsets" section on page
might vary. Consult the user documentation for your headset for more information.
To use a wired headset, press Headset on your phone and dial the number to
place a call, or press Headset to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening
through the headset.
"Connecting Wired and Wireless
21. Steps to use your headset with the IP phone
3
27