Choosing Your Language; Setting The Vcr Output Channel; Selecting The Rf Out Sound Mode (B/G-D/K); Presetting The Stations Automatically - Samsung SV-M35K Instruction Manual

Choosing Your Language

You can change the language in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 ,
Press the corresponding or , buttons to
❷
select the LANGUAGE SET option.
PROG OPTIONS INSTALL
LANG
CLOCK BONUS LANG
LANGUAGE SET
➛❿
OK END: MENU
❷
3
Press the OK button to select this option.
Result: The LANGUAGE SET menu is displayed.
4 Select the required language by pressing the
❷
or buttons.
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result: From now on, all the on-screen information
will be displayed in the language selected.
Setting the VCR Output Setting the VCR Output
Channel Channel
Your VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find
the pictures. Also, you can change the VCR output
channel to adjust the frequency in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 ,
Press the corresponding or , buttons to
❷
select the INSTALLATION option.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿
OK END: MENU
❷
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding or ❷ buttons, until the
VCR OUTPUT CH option is selected.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❿
❷ END: MENU
5
Select the required output channel by pressing the
➛ ❿
or buttons.
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 10).
Selecting the RF OUT Sound
Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K )
according to the TV set connected to your VCR.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 ,
Press the corresponding or ,
❷
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿
END: MENU
❷
❷
4
Press the corresponding or buttons, until
the TV SYSTEM option is selected.
❿
5 Press the button to select K or G.
6
On completion, press MENU twice to exit the
menu.
ENG-12

Presetting the Stations Automatically

You do not need to preset the stations if you have
already set them automatically (see Plug & Auto
Set Up on page 10).
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
Plug & Auto Set up (see page 10)
Automatically
Manually (see page 14)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿
❷ OK
4
Press the corresponding
AUTO SET UP option is selected. Press the
button to select this option.
buttons to
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
❿
❷
5
Press the corresponding
select the your SYSTEM SELECT. Press the OK
button to select this option.
** SYSTEM SELECT **
SYSTEM - B/G
SYSTEM - D/K
❷
YOUR DATA WILL BE LOST
PRESS
MENU
6 Press OK to start the auto scanning.
Result:
➛ ❿
,
or , buttons to
❷
The number of stations automatically stored by the
VCR depends on the number of stations that it has
found.
AUTO SET UP
PLEASE WAIT
I--------------------I
END: MENU
or buttons, until the
❷
❿
7
If you wish to cancel the auto scanning before the
end, press the MENU button three times to exit the
menu.
Once the auto scanning procedure has finished,
:K
some stations may have been stored more than
:CH36
once; select the stations with the best reception and
delete the ones no longer required (see page 15).
END: MENU
or buttons, to
❷
EXECUTE: OK
ENG-13
OK TO CONTINUE
TO EXIT
The PLEASE WAIT indication flashes on
the television screen.
The first frequency band is scanned and
the first station found is displayed and
stored.
The VCR then searches for the second
station and so on.
When the automatic scanning procedure
has finished, the VCR switches
automatically to programme 1.
2%
END:MENU