Troubleshooting Information
Table E-7: Are either of the Processor Board attention LED's located on the front
bezel illuminated?
Status
Processor board 2 attention LED is illuminated
and processor board 1 is installed.
Both processor board 1 and processor board 2
LEDs are illuminated.
E-16
continued
Action
•
Check the interconnect LEDs on the I/O lid
to see if the board is seated.
•
If processors were just added, be sure that
all processors on the board are the same
cache size and speed.
•
Processors on board 2 may not be of the
same cache size or speed as processors
on board 1.
•
Check connector for bent pins.
•
If video is available, look for additional
information contained within the POST
error messages
•
Check the interconnect LEDs on the I/O lid
to see if the boards are seated.
•
If processors were just added, be sure that
all processors on both boards are the same
cache size and speed.
HP ProLiant DL760 Generation 2 Server User Guide