HP DL760 - ProLiant - 1 GB RAM User Manual page 27

Server Features
The ProLiant DL760 G2 server has eight memory banks, each consisting of five
DIMMs installed across the five memory cartridges. In each memory cartridge,
similar DIMMs are installed in bank pairs (1+2, 3+4, 5+6, 7+8) for memory
interleaving to increase performance.
Basic memory features include:
•
ECC memory with single-bit and multibit error (MBE) correction and detection
down to the failed DIMM level
•
Support for standard ECC 133-MHz registered SDRAM
•
Driverless hot-replace functionality
•
Expandability to 40 GB of Hot Plug RAID Memory using industry-standard
PC133 SDRAM DIMMs (32 GB of addressable memory)
•
Support for up to eight memory banks, with each bank consisting of five DIMMs
(one DIMM is for redundancy):
— Each DIMM of a given bank must be of the same size, type, and speed.
— DIMMs are populated in bank pairs for interleaved operation to increase
performance.
NOTE: The DIMM size, type, and speed are defined by the DIMM part number. All
DIMMs in a bank must have the same part number, as indicated by the following example:
123456-12x
All numbers except the last (designated by x) must match for DIMMs to be considered
the same.
•
Front-loadable and lockable memory cartridge
•
Cartridge and DIMM diagnostic information
1-10 HP ProLiant DL760 Generation 2 Server User Guide