Routing Information Protocol; Ip Addresses And The Internet - NETGEAR WGR826V - 54 Mbps Wireless Router Reference Manual

54 mbps wireless router with phone adapter
Table of Contents

Advertisement

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
Routers vary in performance and scale, number of routing protocols supported, and types of
physical WAN connection they support. The WGR826V 54 Mbps Wireless Router with Phone
Adapter is a small office router that routes the IP protocol over a single-user broadband
connection.

Routing Information Protocol

One of the protocols used by a router to build and maintain a picture of the network is the Routing
Information Protocol (RIP). Using RIP, routers periodically update one another and check for
changes to add to the routing table.
The WGR826V Wireless Router supports both the older RIP-1 and the newer RIP-2 protocols.
Among other improvements, RIP-2 supports subnet and multicast protocols. RIP is not required
for most home applications.

IP Addresses and the Internet

Because TCP/IP networks are interconnected across the world, every machine on the Internet must
have a unique address to make sure that transmitted data reaches the correct destination. Blocks of
addresses are assigned to organizations by the Internet Assigned Numbers Authority (IANA).
Individual users and small organizations may obtain their addresses either from the IANA or from
an Internet service provider (ISP). You can contact IANA at www.iana.org.
The Internet Protocol (IP) uses a 32-bit address structure. The address is usually written in dot
notation (also called dotted-decimal notation), in which each group of eight bits is written in
decimal form, separated by decimal points.
For example, the following binary address:
11000011
00100010
is normally written as:
195.34.12.7
The latter version is easier to remember and easier to enter into your computer.
In addition, the 32 bits of the address are subdivided into two parts. The first part of the address
identifies the network, and the second part identifies the host node or station on the network. The
dividing point may vary depending on the address range and the application.
B-2
00001100
00000111
202-10051-01, March 2005
Network, Routing, and Firewall Basics

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgr826v

Table of Contents