NETGEAR WGR826V - 54 Mbps Wireless Router Reference Manual page 62

54 mbps wireless router with phone adapter
Table of Contents

Advertisement

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
NTP Server -- Primary and Secondary - These are the NTP servers that the Router is
currently configured with.
QoS
MSS Value - This value indicates the Maximum Segment Size (MSS), which will be set to
the TCP connections that are initiated while Voice call is in progress.
Gap Interval - This value indicates the inter-packet interval of the data packets that are
transmitted by the Router over WAN while Voice call is in progress. This value is
dynamically programmed by the provisioning server (SASVP) based on the uplink
bandwidth of the Router.
Packet Threshold - This value indicates the packet length for packet classification and
scheduling. The data packets are classified based on packet length. Packets of length less
than or equal to this threshold value are given higher priority over others.
Uplink Bandwidth - This value indicates the current uplink bandwidth. It is computed
from Gap Interval so configured by provisioning server (SASVP).
VoIP Configuration
Registration Proxy - This parameter indicates the domain to be specified in the
REGISTER requests sent to the NAT Proxy.
Port - This indicates the UDP/ TCP port of Registration Proxy.
Transport - This parameter indicates the transport (UDP/TCP) to be used for
communicating with Registration Proxy.
Expires - This value indicates the interval at which REGISTER requests are sent to the
Registration Proxy.
NAT Proxy - This parameter indicates the Server to which the SIP requests need to be
sent.
Port - This indicates the UDP/ TCP port of NAT Proxy.
Transport - This parameter indicates the transport (UDP/TCP) to be used for
communicating with NAT Proxy.
Proxy Domain - This parameter indicates the domain of SIP to be specified in the SIP
request messages (other than REGISTER) sent to the NAT Proxy.
Port - This indicates the UDP/ TCP port of Proxy Domain.
Transport - This parameter indicates the transport (UDP/TCP) to be used for
communicating with Proxy Domain.
6-10
202-10051-01, March 2005
Doing Basic Router Housekeeping

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgr826v

Table of Contents