Upnp Setting; Firmware Upgrade, Provisioning, Voip And Qos Advanced Settings - NETGEAR WGR826V - 54 Mbps Wireless Router Reference Manual

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V

UPnP Setting

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access
the network and connect to other devices as needed. UPnP devices can automatically discover the
services from other registered UPnP devices on the network.
Click on UPnP on the Main menu bar to see the UPnP Settings page:
Figure 7-7: UPnP Settings page
Turn UPnP On: UPnP can be enabled or disabled for automatic device configuration. The default
setting for UPnP is enabled. If disabled, the router will not allow any device to automatically
control the resources, such as port forwarding (mapping), of the router.
Click the check box to Turn UPnP On.
1.
Click the Apply button to save changes.
2.
Firmware Upgrade, Provisioning, VoIP and QoS Advanced
Settings
Note: Access to the Firmware Upgrade, Provisioning, VoIP and QoS Advanced Settings
page requires a password from AT&T technical support.
7-12 Setting Up Advanced Router Configurations
202-10051-01, March 2005