NETGEAR WGR826V - 54 Mbps Wireless Router Reference Manual page 143

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
Client with a WPA/
WPA2-enabled wireless
adapter and supplicant
(Win XP, Funk,
Meetinghouse)
Figure D-4: 802.1x Authentication Sequence
The AP sends Beacon Frames with WPA/WPA2 information element to the stations in the service
set. Information elements include the required authentication method (802.1x or Pre-shared key)
and the preferred cipher suite (WEP, TKIP, or AES). Probe Responses (AP to station) and
Association Requests (station to AP) also contain WPA information elements.
Initial 802.1x communications begin with an unauthenticated supplicant (client device)
1.
attempting to connect with an authenticator (802.11 access point). The client sends an
EAP-start message. This begins a series of message exchanges to authenticate the client.
The access point replies with an EAP-request identity message.
2.
Wireless Networking Basics
For example, a
WPA/WPA2-enabled
AP
Controlled Port
202-10051-01, March 2005
For example, a
RADIUS server
D-13