NETGEAR DM111P - ADSL2+ Ethernet Modem User Manual page 28

Adsl2+ modem router
Hide thumbs Also See for DM111P - ADSL2+ Ethernet Modem:
Table of Contents

Advertisement

ADSL2+ Modem Router User Manual
This screen shows the following settings:
Table 2-1. Menu 3.2 - Modem Router Status Fields
Field
System Up Time
Account Name
Firmware Version
Bootloader Version
ADSL Driver Version
ADSL Port
MAC Address
IP Address
Network Type
IP Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
2-6
Description
The time that the modem router has been connected to the Internet in
the format days:hours:minutes:seconds.
The Account Name assigned to the modem router during setup.
The modem router firmware version. This value will change if you
upgrade your modem router.
The modem router bootloader version. This value will change if you
upgrade your modem router.
The modem router driver version.
These settings apply to the Internet (ADSL) port of the modem router.
The Ethernet MAC address being used by the Internet (ADSL) port of
the modem router.
The IP address that is used by the Internet (ADSL) port of the modem
router. If no address is shown, the modem router cannot connect to
the Internet.
Indicates either Client (in which case the IP address is obtained
dynamically from the ISP) or None.
The IP Subnet Mask being used by the Internet (ADSL) port of the
modem router.
The gateway that is associated with the Internet IP address.
The primary DNS server IP address that is used by the modem
router. This address is usually obtained dynamically from the ISP.
The secondary DNS server IP address that is used by the modem
router. This address is usually obtained dynamically from the ISP.
These settings apply to the Ethernet port of the modem router.
The Ethernet MAC address that is used by the Local (LAN) port of the
modem router.
The IP address that is used by the Local (LAN) port of the modem
router. The default is 192.168.0.1.
If OFF, the modem router will not assign IP addresses to PCs on the
LAN.
If ON, the modem router will assign IP addresses to PCs on the LAN.
The IP subnet mask that is used by the Local (LAN) port of the
modem router. The default is 255.255.255.0.
v1.0, October 2008
Managing Your Modem Router

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm111p-100nasDm111pv2Dm111puv2

Table of Contents