HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 62

62 HP IP Console Switch User Guide
Accessing the Security Dialog Box
From the Main dialog box ("Accessing the Main Dialog Box" on page 45), click
Setup>Security. The Security dialog box is displayed.
Changing the Password
1. From the Security dialog box ("Accessing the Security Dialog Box" on page
2. Enter the new password in the New field, and then press the Enter key.
3. In the Repeat field, reenter the password and press the Enter key.
4. Click OK to change the password.
Setting Password Protection
1. From the Security dialog box ("Accessing the Security Dialog Box" on page
2. Select Enable Screen Saver.
62), click the New field and press the Enter key if the OSD is not open, or
double-click the New field.
IMPORTANT: A valid password must be alphanumeric and be 5 to 15
characters in length. Permitted characters are case-sensitive and can
consist of A–Z, 0–9, spaces, and hyphens.
62), set your password as described in the previous procedure ("Changing the
Password" on page 62).