Cascading a Compaq Server Console Switch with an
HP IP Console Switch
1. Mount the console switches in the rack.
2. Connect the local port KVM cable to the HP IP Console Switch.
3. Connect a UTP CAT5 cable to the server connection port ("Components" on
4. Connect the other end of that same UTP CAT5 cable to the RJ-45 port on the
5. Connect the Interface Adapter to the IN port (designated by the letter A) on
6. Connect a KVM cable to the numbered OUT port on the Compaq Server
7. Connect the other end of that same KVM cable to the appropriate port on the
8. Repeat steps 3 through 7 for any other console switches to be added to this
9. Power on the console switches.
10. Power on the monitor.
11. Power up the server.
page 7) on the HP IP Console Switch.
Interface Adapter.
the Compaq Server Console Switch.
Console Switch.
server.
system.
Cascading Console Switches
39