34
HP IP Console Switch User Guide
8. When finished, press the Enter key to return to the Terminal screen.
Serial Interface Adapter Pinouts
The serial interface adapter is a DCE device. The following table lists the pinouts
for the serial interface adapter.
DB9F Pin
1
2
3
4
5
6
7
8
9
Attaching the Power Supply to the Rack Using Velcro
1. Determine the location for the power supply.
2. Remove the protective strip from one side of the Velcro and attach that side
Serial Interface Adapter Description
Data Terminal Ready (DTR)
Pins 6 and 1 are tied common internal to the serial interface
idapter.
Transmit Data (TXD)
Receive Data (RXD)
Data Set Ready (DSR)
Signal Ground (GND)
Data Terminal Ready (DTR)
Clear to Send (CTS)
Request to Send (RTS)
Not Connected (N/C)
to the power supply.