Removing Servers From The Scan List - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

60 HP IP Console Switch User Guide
Adding Servers to the Scan List
1. From the Scan dialog box ("Activating Scan Mode" on page 61), select the
2. In the Scan Time box, enter the number of seconds (from 3 to 99) before the
3. Click OK to save settings.

Removing Servers from the Scan List

1. From the Scan dialog box ("Activating Scan Mode" on page 61), click the
2. Click OK to save settings.
checkbox beside each server to be added to the scan list.
-or-
Double-click a server name or port.
-or-
Press the Alt key plus the number of the server you want to scan. You can
select up to 16 servers.
scan moves to the next server in the sequence.
-or-
Click Clear to remove all servers from the scan list.
IMPORTANT: Selecting the checkbox beside each server to be added
to the scan list creates the scan list. The creation of a scan list does not
start the Scan mode. You must enable Scan mode through the Scan
Enable checkbox on the Commands dialog box.
NOTE: Servers will be scanned in the order they are selected. If you
remove a server from the Device Modify dialog box later, the change
can affect a custom scan pattern.
server to be removed.
-or-
Double-click a server name or port.
-or-
Click Clear to remove all servers from the scan list.