24
HP IP Console Switch User Guide
Performing a Velcro-Mount Installation
1. Determine the location for the Expansion Module.
2. Remove the protective strip from one side of the Velcro and attach that side
3. Remove the protective strip from the other side of the Velcro and attach the
Configuring the Expansion Module
1. Mount the Expansion Module into the rack.
2. Locate up to nine UTP CAT5 cables.
3. Connect a UTP CAT5 cable to the server connection port ("Components" on
4. Connect the other end of that same UTP CAT5 cable to the IN port on the
5. Connect one end of another UTP CAT5 cable to the OUT port on the
6. Connect the other end of the second UTP CAT5 cable to the Interface
7. Repeat steps 5 and 6 to connect any other servers to this system.
to the Expansion Module.
Expansion Module to the rack frame.
page 7) on the HP IP Console Switch.
Expansion Module.
Expansion Module.
Adapter.