Creating A Eap Group Policy Object In Windows Vista - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Chapter 4 Performing Administrative Tasks
Step 2 Add the Group Policy Object Editor snap-in:
a.
b.
c.
d.
e.
f.
g.
h.
Now the Group Policy Object Editor is ready for use.

Creating a EAP Group Policy Object in Windows Vista

To create a new EAP group policy object , perform the following steps:
In the Default Domain Policy pane, select Windows Settings > Security Settings > Wireless Network
Step 1
Policies.
Right-click Wireless Network Policies and select Create a New Policy.
Step 2
Set your wireless network properties, such as SSID, encryption, and authentication method.
Step 3
Select the EAP method.
Step 4
Step 5 Open properties for the desired EAP modules and configure the settings.
•
•
•
Note
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Go to File > Add/Remove Snap-in...
The Add or Remove Snap-ins dialog box is displayed.
From the Add or Remove Snap-ins dialog box, highlight Group Policy Object Editor in the
Available snap-ins list, and click the Add button.
The Select Group Policy Object dialog box is displayed.
From the Select Group Policy Object dialog box, click Browse.
The Browse for a Group Policy Object dialog box is displayed.
From the Browse for a Group Policy Object dialog box, select the Domains/O Us tab.
Select your domain controller from the Look in drop down list.
Click OK.
From the Select Group Policy Object dialog box, click Finish.
From the Add or Remove Snap-ins dialog box, click OK.
EAP-FAST—In the Advanced Security screen, you can configure supplicant settings such as
machine authentication and SSO. For more information about machine authentication, see the
"Configuring Machine Authentication for EAP-FAST" section on page
about SSO see the "Configuring Single Sign-On for EAP-FAST" section on page
PEAP-GTC—In the Advanced Security screen, you can configure supplicant settings such as
machine authentication and SSO. For more information about machine authentication, see the
"Configuring Machine Authentication for PEAP-GTC" section on page
about SSO see the "Configuring Single Sign-On for PEAP-GTC and LEAP" section on page 4-5
LEAP—In the Advanced Security screen, you can configure supplicant settings for SSO. FOr more
information about SSO, see the
page 4-5
You can configure settings for a wired network by selecting the Wired Network Policy object.
Using Microsoft Tools to Perform Administrative Tasks
"Configuring Single Sign-On for PEAP-GTC and LEAP" section on
4-4. For more information
4-5.
4-5. For more information
4-3